Hi all, I just open ticket #3578 on trac for this problem. As mentioned by john etrax is not going to be part of 808, so the bug is leave unfixed and I don't have the needed knowledge to fix it.
(I don't like to start a discussion/flame about how to submit patch/bug but please use the ticket #3578 for report update on this issues...) 2008/7/29, MichelinoK <[EMAIL PROTECTED]>: > You suspicious are right: > > [EMAIL PROTECTED] Desktop]# ./boot_linux -F -d eth0 -i owrt.zImage Using > internal boot loader: INTERNAL_NW - Network boot (default). > Starting boot... > We're doing a flash write, this may take up to a few minutes... > > Device ID = 0x0000b7f7 > This bootloader was built by root on Wed May 16 21:31:41 CEST 2007. > Checksum of bootloader is 0x000a0a94 > Waiting for load info. > Checksum of file is 0x00000dbd > Got load info. > SET_REGISTER > 0xb0000000 > 0x000095a6 > SET_REGISTER > 0xb0000004 > 0x00000104 > SET_REGISTER > 0xb000000c > 0x1a200040 > SET_REGISTER > 0xb0000008 > 0x00005611 > SET_REGISTER > 0xb0000030 > 0x00001c00 > SET_REGISTER > 0xb0000038 > 0x000000ff > PACKET_INFO > 0xc0004000 > 0x000ddddc > Checksum of file is 0x00000000 > FLASH > 0xc0004000 > 0x00000000 > 0x000d0000 > Found 1 x CFI at 0x80000000 > No single x16 at 0x84000000 > No interleaved x16 at 0x84000000 > 0x80000000: No need to write > 0x80010000: No need to write > 0x80020000: No need to write > 0x80030000: No need to write > 0x80040000: No need to write > 0x80050000: No need to write > 0x80060000: No need to write > 0x80070000: No need to write > 0x80080000: No need to write > 0x80090000: No need to write > 0x800a0000: No need to write > 0x800b0000: No need to write > 0x800c0000: No need to write > 0x80000000: Verifying...OK > JUMP > 0x00000000 > END > Exiting with code 0 > [EMAIL PROTECTED] Desktop]# > > > > > > > > [EMAIL PROTECTED] Desktop]# ./boot_linux -F -d eth0 -i taa2.zImage Using > internal boot loader: INTERNAL_NW - Network boot (default). > Starting boot... > We're doing a flash write, this may take up to a few minutes... > > Device ID = 0x00007fc7 > This bootloader was built by root on Wed May 16 21:31:41 CEST 2007. > Checksum of bootloader is 0x000a0a94 > Waiting for load info. > Checksum of file is 0x00001e4d > Got load info. > SET_REGISTER > 0xb0000000 > 0x000093f8 > SET_REGISTER > 0xb0000004 > 0x00000204 > SET_REGISTER > 0xb000000c > 0x09603636 > SET_REGISTER > 0xb0000008 > 0x8000c002 > PAUSE_LOOP > 0x00020000 > SET_REGISTER > 0xb0000008 > 0x8000c602 > SET_REGISTER > 0xb0000008 > 0x8000c002 > SET_REGISTER > 0x38001f00 > 0x00000007 > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8030c202 > SET_REGISTER > 0xb0000008 > 0x8000c002 > SET_REGISTER > 0xb0000008 > 0x80008002 > SET_REGISTER > 0xb0000030 > 0x00000b00 > SET_REGISTER > 0xb0000038 > 0x0000fed3 > PACKET_INFO > 0xc0004000 > 0x000c781a > Checksum of file is 0x0664c737 > FLASH > 0xc0004000 > 0x00000000 > 0x000c0000 > Found 1 x CFI at 0x80000000 > No single x16 at 0x84000000 > No interleaved x16 at 0x84000000 > 0x80000000: Erasing 0x00010000 bytes > 0x80000000: Writing 0x00010000 bytes > 0x80010000: Erasing 0x00010000 bytes > 0x80010000: Writing 0x00010000 bytes > 0x80020000: Erasing 0x00010000 bytes > 0x80020000: Writing 0x00010000 bytes > 0x80030000: Erasing 0x00010000 bytes > 0x80030000: Writing 0x00010000 bytes > 0x80040000: Erasing 0x00010000 bytes > 0x80040000: Writing 0x00010000 bytes > 0x80050000: Erasing 0x00010000 bytes > 0x80050000: Writing 0x00010000 bytes > 0x80060000: Erasing 0x00010000 bytes > 0x80060000: Writing 0x00010000 bytes > 0x80070000: Erasing 0x00010000 bytes > 0x80070000: Writing 0x00010000 bytes > 0x80080000: Erasing 0x00010000 bytes > 0x80080000: Writing 0x00010000 bytes > 0x80090000: Erasing 0x00010000 bytes > 0x80090000: Writing 0x00010000 bytes > 0x800a0000: Erasing 0x00010000 bytes > 0x800a0000: Writing 0x00010000 bytes > 0x800b0000: Erasing 0x00010000 bytes > 0x800b0000: Writing 0x00010000 bytes > 0x80000000: Verifying...OK > JUMP > 0x00000000 > END > Exiting with code 0 > [EMAIL PROTECTED] Desktop]# > > > Now the problem is: what should we modify to make owrt works? I'm not a > linux expert, but if someone could tell me what differences are to check > between CrisOS and Openwrt... > > Let's wait...or do you have any idea? > > > Regards > Michele > > > > PS: Sorry for my english! > > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > -- Claudio User linux #415284 - http://www.crisos.org/ _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
