On Sat, 15 Jan 2022 17:59:32 +0000, tincantech via Openvpn-users <openvpn-users@lists.sourceforge.net> wrote:
>> > See: https://community.openvpn.net/openvpn/wiki/HOWTO >> > >> > (Read it twice. I have it open all the time) >> > >> > Then setup routing to connect your networks. I used this: https://community.openvpn.net/openvpn/wiki/HOWTO#IncludingmultiplemachinesontheclientsidewhenusingaroutedVPNdevtun And did the steps outlined there and it all works! :-) I have a test setup where the offsite router is actually at home but connected to a different fiber box connection so it is elsewhere on the Internet. Then I have put one of my many Raspberries on that router too. When I started the router it connected just fine to my home OpenVPN server using the ccd entry for the client as outlined in the how-to. And then when I started the RPi I got the report it always sends on startup where I can see the external IP address (different from my main router's external address!). Now I could both ping and ssh to that RPi from my Windows PC and the RPi could ping devices on my home LAN too. So it *is* running bidirectional comm, both LAN:s are connected as a single LAN with two IP ranges. Thanks again for your pointer to the best document I have yet seen on OpenVPN. Earlier I had only found and bookmarked this Howto: https://openvpn.net/community-resources/how-to/ That is not nearly as good as the new one you linked to! THANKS A LOT AGAIN!!!! -- Bo Berglund Developer in Sweden _______________________________________________ Openvpn-users mailing list Openvpn-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openvpn-users
