Hi On Fri, Jan 14, 2022 at 10:36 AM Bo Berglund <bo.bergl...@gmail.com> wrote: > > I have two ASUS routers, RT-AC68U and RT-AC86U. > One is sitting at home (RT-AC86U) on a fiber connection and the other will > soon > be placed at my summer home where we have just gotten a fiber installed. > > Now I would like to hook the two sites together using VPN so that I can reach > resources on both LAN from both places. > > I have seen this documentation: > https://openvpn.net/vpn-server-resources/site-to-site-routing-explained-in-detail/ > It shows in principle how it can be done.
That doc relates to the commercial OpenVPN Access server, not the community version of OpenVPN. Read this instead: https://community.openvpn.net/openvpn/wiki/HOWTO#ExpandingthescopeoftheVPNtoincludeadditionalmachinesoneithertheclientorserversubnet Ignore the part about bridged setups, stick to routed tun. > > But now I wonder if someone here has done this using the built-in OpenVPN > (client/server) of the ASUS routers and can share their experience? > > I also found ASUS documentation of how to do it but using IPSec rather than > OpenVPN: > https://www.asus.com/support/FAQ/1033578/ > > This also seems to concern a different series of routers than what I have, > though, and the dialogs shown do not look the same as what I have so this is > not > working. > > Do I have to configure my routers as both OpenVPN Server and Client and have > them connect to each other, or can one connect to the other in Client mode > while > the routing will be both ways? I do not know about bullit-in OpenVPN in ASUS routers, but typically you would run one as a server and the other as a client although point-to-point is also possible. Use routed tun mode and set up routing as in the howto linked above. Selva _______________________________________________ Openvpn-users mailing list Openvpn-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openvpn-users
