I have several additional questions: 1. What version of Fuel do you use? 2. What instruction do you fallow to install Fuel?
>> reinstalling from a "basic" CentOS 7 installation 3. Could you please clarify how exactly you do installation? Thanks, On Mon, Feb 13, 2017 at 9:33 AM, Vincent Jahjah <[email protected]> wrote: > So, I tried reinstalling from a "basic" CentOS 7 installation. > > I observed similar strange behavior from the previous time I tried the > installation, which means it is reproducible and that I don't can't move on. > > > I don't know how to export the log file from my server, and considering > its size, I doubt it's much of a loss if I send only screenshots of the > most suspicious parts. The last one specifically is the Cobbler failure, > which has a stacktrace that doesn't seem to appear in the log file; it only > appears during the error (and I can't scroll up D:). > > > Reading the error, I checked if httpd was running, but "status" indicates > it's active. I'm not sure what is meant by "SELinux could be in the way". > > > The other screenshots are in chronological order, the first one occurring > shortly after the GRUB setup of fuel; I understand it has to do with > finding apt-get-like programs. > > > (I'm sorry if my feedback output is limited: the cycle for reproducing the > error is of about an hour and I'm very limited by my remote-access > technology in terms of copy-pasting things. If you really need additional > feedback, I'll do my best to give you the full output) > > > Regards > ------------------------------ > *De :* Evgeniy L <[email protected]> > *Envoyé :* 10 février 2017 17:58:56 > > *À :* Vincent Jahjah > *Cc :* [email protected] > *Objet :* Re: [Openstack] [Fuel] Cannot access Fuel 10.0 UI because of > unavailable Nailgun server > > The problem is for some reasons your Fuel Master installation was not > finished successfully, there are logs which you can check to figure out > what went wrong (see my previous message), also send a full output of > `bootstrap_admin_node.sh` command execution. It may make sense to try to > install from scratch, if you did a lot of manual changes and > configurations, to ensure there are no overlapping problems. > > Thanks, > > On Fri, Feb 10, 2017 at 9:42 AM, Vincent Jahjah < > [email protected]> wrote: > >> Hello, >> >> Thank you for your advice! >> >> >> Curl did not work on the master node. >> >> It seems that nginx was not installed (service nginx status did not >> detect nginx). >> >> I used yum to install nginx, but doing this seems arbitrary and does not >> seem to do anything (was it not supposed to be there in the first place?) >> >> >> The bootstrap_admin_node logs suggested I use "fuel-bootstrap build >> --activate" once I had fixed the network. >> >> This command crashes on a Cobbler issue (first image). >> >> The configuration file of Cobbler has a comment suggesting I restart the >> cobbler demon. (second image) >> >> The command still fails after restarting the demon. >> >> This is the point where I begin to suspect httpd (apache) is in cause. >> >> When I restart httpd, I get a strange error explaining how there is a >> name duplication in the Cobbler configuration file inside the /etc/httpd >> folders. (two last images) Specifically: >> >> >> > # Use separate process group for wsgi >> > WSGISocketPrefix /var/run/wsgi >> > WSGIScriptAlias /cobbler_web /usr/share/cobbler/web/cobbler.wsgi >> > WSGIDaemonProcess cobbler_web display-name=%{GROUP} /// ***This >> line*** >> > WSGIProcessGroup cobbler_web >> > WSGIPassAuthorization On >> >> >> At this point, I am rather clueless and am starting to wonder if I am not >> breaking the OS further by stabbing in the dark. I wonder if this is >> leading anywhere, or whether I should just restart the Fuel installation >> from the CentOS image... >> >> >> Vincent >> ------------------------------ >> *De :* Evgeniy L <[email protected]> >> *Envoyé :* 7 février 2017 13:07:32 >> *À :* Vincent Jahjah >> *Cc :* [email protected] >> *Objet :* Re: [Openstack] [Fuel] Cannot access Fuel 10.0 UI because of >> unavailable Nailgun server >> >> Hi, >> >> Try to access UI using "curl" from your machine and from Fuel Master: >> 1. If it's not available from your machine but available from Fuel >> Master, make sure that your network is configured correctly use regular >> troubleshooting techniques for that ping/traceroute/tcpdump. >> 2. If it's not available from both, your machine and Fuel Master, verify >> that Nginx up and running and that it's configured correctly, there could >> be problems with installation see "/var/log/puppet/bootstrap_admin_node.log" >> for details. >> >> Thanks, >> >> On Sun, Feb 5, 2017 at 6:21 AM, Vincent Jahjah < >> [email protected]> wrote: >> >>> Hello, >>> >>> >>> I have attempted installing Fuel on my IBM server for testing purposes. >>> >>> I currently find myself in a similar situation as the one described in >>> this Openstack ask post: https://ask.openstack.or >>> g/en/question/84510/fuel-ui-network-error/ >>> >>> >>> I can ping to and from the server, and when I try to connect to the UI >>> from my web browser, the page does not load. The browser tells me I might >>> have too stringent security requirements, but this does not seem to be the >>> issue (deactivating the firewall does not change anything). >>> >>> >>> I cannot restart the Nailgun server simply because the dockerctl >>> commands are deprecated on my version, and I have not found anywhere the >>> commands that are meant to replace it. >>> >>> fuel-utils reveals no issues with Nailgun, but apparently something is >>> off with Cobbler (that's probably not relevant though). >>> >>> >>> When I check for the availability of the Nailgun server, I am told >>> "Can't connect to Nailgun server! Please modify "SERVER_ADDRESS" and >>> "LISTEN_PORT"" >>> >>> >>> My config.yaml file looks like this: >>> >>> >>> SERVER_ADDRESS:"10.12.99.34" >>> LISTEN_PORT:"8000" >>> SERVER_PORT:"8443" >>> KEYSTONE_USER:"................" >>> KEYSTONE_PASS:"................" >>> KEYSTONE_PORT:"5000" >>> >>> The IP is the host's IP as well as that advertised on the fuel console >>> launch; 8443 is the advertised port for login as well. >>> >>> I have added some of the following rules to the host's firewall, more or >>> less blindly following tutorials: >>> >>> *filter >>> :INPUT DROP [0:0] >>> :FORWARD DROP [0:0] >>> :OUTPUT ACCEPT [243:14376] >>> :ext-filter-forward - [0:0] >>> :ext-filter-input - [0:0] >>> -A INPUT -i lo -m comment --comment "000 allow loopback" -j ACCEPT >>> -A INPUT -p tcp -m state --state NEW --dport 23 -j ACCEPT >>> -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT >>> -A INPUT -m state --state NEW -m tcp -p tcp --dport 8000 -j ACCEPT >>> -A INPUT -s 10.12.99.0/24 -p tcp -m multiport --dports 22 -m comment >>> --comment "010 ssh" -m state --state NEW -j ACCEPT >>> >>> I do "service iptable restart" and I restart firewalld after modifying >>> this file. >>> I restart the network before trying to access the fuel UI. >>> I do all of my modifications on my client machine, on PuTTy using Telnet. >>> >>> I've been stuck on this issue and have been on the lookout for support, >>> hence my joining this email list. >>> This is not the only issue I've run into, but that's the most pressing >>> one right now. >>> I know that I am attempting to join the right site on the browser >>> because the tab icon on Chrome changes to the Fuel icon. >>> >>> Regards, >>> >>> Vincent >>> >>> >>> fuel ui network error - Ask OpenStack: Q&A Site for ... >>> <https://ask.openstack.org/en/question/84510/fuel-ui-network-error/> >>> ask.openstack.org >>> Hi All I am trying Mirantis Fuel 7 or OpenStack deployment. Environment: >>> Fuel Master - 2 IP (10.20.0.2, 192.168.x.y, Gateway - 192.168.x.z) Fuel >>> slaves - 2 Using ... >>> >>> >>> _______________________________________________ >>> Mailing list: http://lists.openstack.org/cgi >>> -bin/mailman/listinfo/openstack >>> Post to : [email protected] >>> Unsubscribe : http://lists.openstack.org/cgi >>> -bin/mailman/listinfo/openstack >>> >>> >> >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : [email protected] Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
