Hi, Try to access UI using "curl" from your machine and from Fuel Master: 1. If it's not available from your machine but available from Fuel Master, make sure that your network is configured correctly use regular troubleshooting techniques for that ping/traceroute/tcpdump. 2. If it's not available from both, your machine and Fuel Master, verify that Nginx up and running and that it's configured correctly, there could be problems with installation see "/var/log/puppet/bootstrap_admin_node.log" for details.
Thanks, On Sun, Feb 5, 2017 at 6:21 AM, Vincent Jahjah <vincent_jah...@hotmail.com> wrote: > Hello, > > > I have attempted installing Fuel on my IBM server for testing purposes. > > I currently find myself in a similar situation as the one described in > this Openstack ask post: https://ask.openstack. > org/en/question/84510/fuel-ui-network-error/ > > > I can ping to and from the server, and when I try to connect to the UI > from my web browser, the page does not load. The browser tells me I might > have too stringent security requirements, but this does not seem to be the > issue (deactivating the firewall does not change anything). > > > I cannot restart the Nailgun server simply because the dockerctl commands > are deprecated on my version, and I have not found anywhere the commands > that are meant to replace it. > > fuel-utils reveals no issues with Nailgun, but apparently something is off > with Cobbler (that's probably not relevant though). > > > When I check for the availability of the Nailgun server, I am told "Can't > connect to Nailgun server! Please modify "SERVER_ADDRESS" and "LISTEN_PORT"" > > > My config.yaml file looks like this: > > > SERVER_ADDRESS:"10.12.99.34" > LISTEN_PORT:"8000" > SERVER_PORT:"8443" > KEYSTONE_USER:"................" > KEYSTONE_PASS:"................" > KEYSTONE_PORT:"5000" > > The IP is the host's IP as well as that advertised on the fuel console > launch; 8443 is the advertised port for login as well. > > I have added some of the following rules to the host's firewall, more or > less blindly following tutorials: > > *filter > :INPUT DROP [0:0] > :FORWARD DROP [0:0] > :OUTPUT ACCEPT [243:14376] > :ext-filter-forward - [0:0] > :ext-filter-input - [0:0] > -A INPUT -i lo -m comment --comment "000 allow loopback" -j ACCEPT > -A INPUT -p tcp -m state --state NEW --dport 23 -j ACCEPT > -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT > -A INPUT -m state --state NEW -m tcp -p tcp --dport 8000 -j ACCEPT > -A INPUT -s 10.12.99.0/24 -p tcp -m multiport --dports 22 -m comment > --comment "010 ssh" -m state --state NEW -j ACCEPT > > I do "service iptable restart" and I restart firewalld after modifying > this file. > I restart the network before trying to access the fuel UI. > I do all of my modifications on my client machine, on PuTTy using Telnet. > > I've been stuck on this issue and have been on the lookout for support, > hence my joining this email list. > This is not the only issue I've run into, but that's the most pressing one > right now. > I know that I am attempting to join the right site on the browser because > the tab icon on Chrome changes to the Fuel icon. > > Regards, > > Vincent > > > fuel ui network error - Ask OpenStack: Q&A Site for ... > <https://ask.openstack.org/en/question/84510/fuel-ui-network-error/> > ask.openstack.org > Hi All I am trying Mirantis Fuel 7 or OpenStack deployment. Environment: > Fuel Master - 2 IP (10.20.0.2, 192.168.x.y, Gateway - 192.168.x.z) Fuel > slaves - 2 Using ... > > > _______________________________________________ > Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/ > openstack > Post to : openstack@lists.openstack.org > Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/ > openstack > >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
