Just to let you know, I still have the problem, that I can not program the external flash ;)
I am wondering that most of the other non cfi flash drivers require the correct clock rate as parameter. How does the cfi driver computes the timings without knowledge of the current clock? -----Ursprüngliche Nachricht----- Von: openocd-development-boun...@lists.berlios.de [mailto:openocd-development-boun...@lists.berlios.de] Im Auftrag von Michael Schwingen Gesendet: Donnerstag, 2. Dezember 2010 00:20 An: openocd-development@lists.berlios.de Betreff: Re: [Openocd-development] Programming external flash with OpenOCD fails On 11/30/2010 08:36 PM, Starkeeper wrote: > Indeed it works without the wokring area! OK. That means at least the flash is working, and the bus setup is probably also OK. OpenOCD tried to download code + data to RAM on the target, and something in that process goes wrong. I don't know the LPC internals, so I can't check if the memory setup really enables working RAM at 0x40000000. cu Michael _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
