On Mon, Aug 2, 2010 at 5:30 PM, Xiaofan Chen <xiaof...@gmail.com> wrote: > On Mon, Aug 2, 2010 at 9:43 AM, Xiaofan Chen <xiaof...@gmail.com> wrote: >> On Mon, Aug 2, 2010 at 4:17 AM, Olof Tångrot <olof.tang...@telia.com> wrote: >>> It also crashes with the replacement version libftdi that is linked to >>> libusb-1.0 discussed earlier. >> >> Hmm, I will try it out myself. I am not so sure if this has something >> to do with the version of the libusb-1.0 Windows backend snapshot >> version. There was a bug in the recent snapshot. Supposedly >> the latest snapshot will help. And this may also have something >> to do with the fact that libftdi-1.0 may not be 100% backward >> compatible with libftdi. >> > > You are right. The exe is not compatible with libftdi-1.0 and > libusb-1.0 Windows backend.
Just in case you want to try out Windows as well, here is the Windows test binary with libftdi-1.0, it is a test binary with only ft2232-libftdi enabled. http://code.google.com/p/picusb/downloads/list http://picusb.googlecode.com/files/openocd_04Aug2010_libftdi1_mingw32.zip OpenOCD: with only ft2232-libftdi support, only for testing, cross-built under Linux with MinGW, 04-August-2010 libusb-1.0.dll: downloaded from the following website. http://www.libusb.org/wiki/windows_backend (pbr291 MinGW32 binary snapshots) libftdi.dll: cross-built under Linux with MinGW from libftdi-1.0 git 04-August-2010 Take note to use libftdi-1.0 under Windows, you need libusb-1.0 Windows backend. And currently you need to use WinUSB driver, not the FTDI driver or libusb-win32 device driver. You should use Zadig to install the WinUSB driver for the JTAG interface (typically interface 0) of your FT2232 device. You can download Zadig from here. http://www.libusb.org/wiki/windows_backend I do not have FT2232H based device. The binary is only tested with TI/Luminary EK-LM3S1968 demo board (FT2232D based, Interface 0 used for JTAG, interface 1 used for VCP) and under Windows 7 32bit. D:\work\openocd\openocd_04Aug2010_mingw32\bin>openocd -f board\ek-lm3s1968.cfg Open On-Chip Debugger 0.5.0-dev (2010-08-04-19:54) Licensed under GNU GPL v2 For bug reports, read http://openocd.berlios.de/doc/doxygen/bugs.html Info : only one transport option; autoselect 'jtag' 3000 kHz adapter_nsrst_delay: 100 srst_only separate srst_gates_jtag srst_open_drain Info : clock speed 3000 kHz Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0x ba00, ver: 0x3) Info : lm3s1968.cpu: hardware has 6 breakpoints, 4 watchpoints D:\work\openocd\openocd_04Aug2010_mingw32\bin>ver Microsoft Windows [Version 6.1.7600] -- Xiaofan _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
