Results from auto probing.
1. Power cycle
2. run the test twice, second time the result is different...
oyv...@titan:~/workspace/openocd$ openocd -c "interface ZY1000" -c
"zy1000_server 10.0.0.69" -c "reset_config trst_only" -c init -c reset
-c shutdown
Open On-Chip Debugger 0.5.0-dev-00357-g2d7c078 (2010-06-21-08:46)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
trst_only separate trst_push_pull
Info : RCLK (adaptive clock speed)
Warn : There are no enabled taps. AUTO PROBING MIGHT NOT WORK!!
Warn : AUTO auto0.tap - use "jtag newtap auto0 tap -expected-id 0x0b86802f ..."
Warn : AUTO auto0.tap - use "... -irlen 6"
Warn : gdb services need one or more targets defined
invalid command name "reset"
oyv...@titan:~/workspace/openocd$ openocd -c "interface ZY1000" -c
"zy1000_server 10.0.0.69" -c "reset_config trst_only" -c init -c reset
-c shutdown
Open On-Chip Debugger 0.5.0-dev-00357-g2d7c078 (2010-06-21-08:46)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
trst_only separate trst_push_pull
Info : RCLK (adaptive clock speed)
Warn : There are no enabled taps. AUTO PROBING MIGHT NOT WORK!!
Warn : AUTO auto0.tap - use "jtag newtap auto0 tap -expected-id 0x00000000 ..."
Warn : AUTO auto0.tap - use "... -irlen 6"
Warn : gdb services need one or more targets defined
invalid command name "reset"
--
Øyvind Harboe
US toll free 1-866-980-3434 / International +47 51 63 25 00
http://www.zylin.com/zy1000.html
ARM7 ARM9 ARM11 XScale Cortex
JTAG debugger and flash programmer
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
