On Sun, Feb 28, 2010 at 4:05 PM, Gene Smith <g...@chartertn.net> wrote:
> LibUSB-Win32 Devices > Olimex ARM-USB-OCD (Channel A) > ? Other Devices > ? Olimex OpenOcd JTAG > Universal Serial Bus Controller > USB Composite > USB Composite > > The first one looks like the correct and functional driver that uses > libusb0.sys and libusb0.dll. That is for Channel A which uses the libusb-win32 device driver and it works fine. > The ones under Universal Serial Bus Controller come and go as the Olimex USB > is plugged and un-plugged and are Microsoft Drivers. I don't know what these > do. > > So the one with the yellow question marks are probably the problem. If I > delete it or disabled it it comes back on the next h/w scan. When I try to > install the driver using the *.inf that Freddie supplied, I see a windows > error dialog stating something like "driver does not describe your > hardware". You have to install the original FTDI driver for that (serial port). After that, the wizard will not pop up again. > We are not using the serial port built into the Olimex. But you still need to install the FTDI driver for it. If not the Windows Wizard will come out. You can use Device Manager, right click the device with the Yellow Question Mark and then use Update Driver to point it to the FTDI driver (provided by Olimex). -- Xiaofan http://mcuee.blogspot.com _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
