Hello Xiaofan! On Wed, Feb 17, 2010 at 10:42 AM, Xiaofan Chen wrote: > Message: 3 > Date: Wed, 17 Feb 2010 16:41:00 +0800 > From: Xiaofan Chen > Subject: Re: [Openocd-development] FreeBSD status of 0.4.0-RC2 (was: > FreeBSD status of 0.4.0-RC1) > To: Openocd-Dev > (...) > Error: J-Link command 0xdf failed (-6) > Error: usb_bulk_write failed (requested=6, result=-6) > Error: jlink_tap_execute, wrong result -107 (expected 1) > Command handler execution failed > Warn : jtag initialization failed; try 'jtag init' again.
Ah, there were reports from Australia even for 0.2.0 that this JLink does not work on FreeBSD, but the patch is provided - please take a look at patch for current openocd port (/usr/ports/devel/openocd/files) and try to (somehow) apply this patch with current 0.4.0-RC2. Unfortunately I dont have this JLink interface so I cannot perform this task :-( Best regards! Tomek ps/2: Does anybody know how to reply to a message hidden in a plaintext-digest as in this situation? ;P -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
