On Wed, Feb 17, 2010 at 4:35 PM, Xiaofan Chen <xiaof...@gmail.com> wrote:
> On Mon, Feb 15, 2010 at 8:43 AM, Xiaofan Chen <xiaof...@gmail.com> wrote:
>> I just want to use plain git if possible without using the port system.
>
> Yes it is possible now. I do not need to use the port system after all.
>
The first run with EK-LM3S1968 seems to work. But J-Link does not seem to work.
[mc...@myfreebsd ~/Desktop/build/openocd/luminary/lm3s1968]$ openocd
-f board/ek-lm3s1968.cfg
Open On-Chip Debugger 0.4.0-rc2-dev-00006-gaa8db98 (2010-02-17-16:31)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
3000 kHz
jtag_nsrst_delay: 100
srst_only separate srst_gates_jtag srst_open_drain
Info : clock speed 3000 kHz
Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg:
0x23b, part: 0xba00, ver: 0x3)
Info : lm3s1968.cpu: hardware has 6 breakpoints, 4 watchpoints
^C
[mc...@myfreebsd ~/Desktop/build/openocd/luminary/lm3s1968]$ sudo
openocd -f ek-lm3s1968_jlink.cfg
Open On-Chip Debugger 0.4.0-rc2-dev-00006-gaa8db98 (2010-02-17-16:31)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
3000 kHz
jtag_nsrst_delay: 100
srst_only separate srst_gates_jtag srst_open_drain
Info : J-Link initialization started / target CPU reset initiated
Error: J-Link command 0xde failed (-6)
Error: J-Link command 0xdc failed (-6)
Error: J-Link command 0x01 failed (-6)
Error: J-Link command EMU_CMD_VERSION failed (-60)
Info : J-Link JTAG Interface ready
Error: J-Link command 0xdd failed (-6)
Error: J-Link command 0xdf failed (-6)
Error: J-Link setting speed failed (-6)
Error: usb_bulk_write failed (requested=6, result=-6)
Error: jlink_tap_execute, wrong result -107 (expected 1)
Info : clock speed 3000 kHz
Error: J-Link command 0xdd failed (-6)
Error: J-Link command 0xdf failed (-6)
Error: usb_bulk_write failed (requested=6, result=-6)
Error: jlink_tap_execute, wrong result -107 (expected 1)
Error: usb_bulk_write failed (requested=6, result=-6)
Error: jlink_tap_execute, wrong result -107 (expected 1)
Error: J-Link command 0xdc failed (-6)
Error: J-Link command 0xdf failed (-6)
Error: usb_bulk_write failed (requested=6, result=-6)
Error: jlink_tap_execute, wrong result -107 (expected 1)
Error: J-Link command 0xdd failed (-6)
Error: J-Link command 0xdf failed (-6)
Error: usb_bulk_write failed (requested=6, result=-6)
Error: jlink_tap_execute, wrong result -107 (expected 1)
Command handler execution failed
Warn : jtag initialization failed; try 'jtag init' again.
--
Xiaofan http://mcuee.blogspot.com
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
