Hello! I have some problems with running STM32Primer1 and the
0.4.0-rc2 on FreeBSD :-(
%openocd -f interface/rlink.cfg -f board/stm32f10x_128k_eval.cfg
Open On-Chip Debugger 0.4.0-rc2 (2010-02-15-20:22)
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
1000 kHz
jtag_nsrst_delay: 100
jtag_ntrst_delay: 100
Info : clock speed 375 kHz
Info : JTAG tap: stm32.cpu tap/device found: 0x3ba00477 (mfg: 0x23b,
part: 0xba00, ver: 0x3)
Info : JTAG tap: stm32.bs tap/device found: 0x16410041 (mfg: 0x020,
part: 0x6410, ver: 0x1)
Info : stm32.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : accepting 'telnet' connection from 0
Info : JTAG tap: stm32.cpu tap/device found: 0x3ba00477 (mfg: 0x23b,
part: 0xba00, ver: 0x3)
Info : JTAG tap: stm32.bs tap/device found: 0x16410041 (mfg: 0x020,
part: 0x6410, ver: 0x1)
Warn : Timeout (1000ms) waiting for ACK=OK/FAULT in JTAG-DP transaction
Warn : Timeout (1000ms) waiting for ACK=OK/FAULT in JTAG-DP transaction
Warn : Timeout (1000ms) waiting for ACK=OK/FAULT in JTAG-DP transaction
(...)
And this is caused by:
%telnet localhost 4444
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Open On-Chip Debugger
> reset run
JTAG tap: stm32.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part:
0xba00, ver: 0x3)
JTAG tap: stm32.bs tap/device found: 0x16410041 (mfg: 0x020, part:
0x6410, ver: 0x1)
Timeout (1000ms) waiting for ACK=OK/FAULT in JTAG-DP transaction
Timeout (1000ms) waiting for ACK=OK/FAULT in JTAG-DP transaction
Timeout (1000ms) waiting for ACK=OK/FAULT in JTAG-DP transaction
(...)
Best regards,
Tomek
--
CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
