Hello David! On Mon, Feb 15, 2010 at 8:08 PM, David Brownell <davi...@pacbell.net> wrote: > On Monday 15 February 2010, CeDeROM wrote: >> Hello! I have some problems with running STM32Primer1 and the >> 0.4.0-rc2 on FreeBSD :-( >> >> %openocd -f interface/rlink.cfg -f board/stm32f10x_128k_eval.cfg >> > > > For starters, "board/stm32f10x_128k_eval.cfg" isn't a Primer1 config.
With 0.2.0 everything was fine (no timeouts). Also the board worked fine, maybe the memory is smaller in Primer1, so you are right I will try to create a separate cfg file for that board soon :-) > But also ... don't all those "STM32Primer" boards require > SWD support? OpenOCD doesn't yet support that. Partially - the Primer1 use RLink in JTAG mode, Primer2 use RLink in SWD mode. I am planning to work on SWD support soon (probably start/mid march) - I have even downloaded some documentation few days ago :-) Btw. I have just submitted an 0.4.0-RC2 "openocd-devel" port for FreeBSD Port System - currently it awaits assignment and approval, but in a few days it should become available for testing straight from the port tree - until then attached package can be used :-) Best regads, Tomek Cedro -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
openocd-devel.tar.gz
Description: GNU Zip compressed data
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
