We(Zylin) have done some target testing, but have a couple of targets lined up for this week.
We found a case where reset init worked from telnet, but failed from gdb, we'll post when we're ready(possibly with a patch). > (b) Øyvind's desire for an "erase_address" option to pad > to sector boundaries. This would be a new feature. If we have the ability to erase all sectors in an address range, we have no regression outstanding. > - Various ARMs should be enabling DCC downloads more often, > for speed. (Not necessarily release-blockers...) What we agreed on doing here is to print out a warning if DCC downloads + fast memory access were not enabled after reset. This will prompt fixing trivial problems in board/target config scripts. Should be easy enough. At this point we only expect DCC to be broken for contrived situations(in which case a false positive warning won't be a problem). -- Øyvind Harboe US toll free 1-866-980-3434 / International +47 51 63 25 00 http://www.zylin.com/zy1000.html ARM7 ARM9 ARM11 XScale Cortex JTAG debugger and flash programmer _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
