This is actually expected; there was no warning previously, and the dummy driver always fails because it returns garbage.
It still starts up, right? The fact that it is telling you where something failed is a good thing, if were talking about real hardware... right? --Z On Fri, 2009-12-04 at 08:31 +0100, Øyvind Harboe wrote: > I thought a fix for this one was pushed yesterday? > > Still happens... With dummy driver even. > > > oyv...@titan:~/workspace/build$ openocd -f interface/dummy.cfg -f > board/at91eb40a.cfg > Open On-Chip Debugger 0.4.0-dev-00845-g24551b7 (2009-12-04-08:26) > For bug reports, read > http://openocd.berlios.de/doc/doxygen/bugs.html > srst_only srst_pulls_trst srst_gates_jtag srst_open_drain > fast memory access is enabled > dcc downloads are enabled > 16000 kHz > Info : clock speed 16000 kHz > Error: The 'init' command must be used before 'init'. > Command handler execution failed > Warn : jtag initialization failed; try 'jtag init' again. > > > _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
