I thought a fix for this one was pushed yesterday?
Still happens... With dummy driver even.
oyv...@titan:~/workspace/build$ openocd -f interface/dummy.cfg -f
board/at91eb40a.cfg
Open On-Chip Debugger 0.4.0-dev-00845-g24551b7 (2009-12-04-08:26)
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
srst_only srst_pulls_trst srst_gates_jtag srst_open_drain
fast memory access is enabled
dcc downloads are enabled
16000 kHz
Info : clock speed 16000 kHz
Error: The 'init' command must be used before 'init'.
Command handler execution failed
Warn : jtag initialization failed; try 'jtag init' again.
--
Øyvind Harboe
US toll free 1-866-980-3434 / International +47 51 63 25 00
http://www.zylin.com/zy1000.html
ARM7 ARM9 ARM11 XScale Cortex
JTAG debugger and flash programmer
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
