On Monday 28 September 2009, Spencer Oliver wrote: > Hi, > > I have noticed that now that openocd will output an error if no jtag id is > given. eg. > > Info : JTAG tap: lm3s811.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: > 0xba00, ver: 0x3) > Error: JTAG tap: lm3s811.cpu UNEXPECTED: 0x3ba00477 (mfg: 0x23b, part: > 0xba00, ver: 0x3) > Error: Trying to use configured scan chain anyway...
The current "lm3s811.cfg" file *does* include that ID ... > Is this the expected behaviour now, as previous versions would fail silently > if no id was given. I changed that when I changed it to make sure it didn't drop messages in various cases. I think it's better to get the config files updated, so startup verification can do a better job, but I might be persuaded otherwise. There's also the point that we have a bit of a chicken/egg problem -- how do folk find the IDs to use? If we don't list them, that can be hard. At one point I was firing up urJTAG for such scans, but that seems undesirable. :) Do you think this should change? - Dave _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
