Hi,
I have installed OpenOCD 0.2.0 through the windows installer (found at http://www.freddiechopin.info/) in the default location C:\Program Files\OpenOCD\ Then I extracted the ft2232.zip inside C:\Program Files\OpenOCD\0.2.0\drivers\ft2232. I removed giveio.zip and rlink.zip. So now C:\Program Files\OpenOCD\0.2.0\drivers\ft2232 folder contains 1. libusb0.dll 2. libusb0.sys 3. libusb-win32_ft2232_driver.inf ( modified to specify Olimex ARM-USB-TINY. See attached zip file ) I replaced Board and Target folders with the folders (attached in the mail). That means now 'C:\Program Files\OpenOCD\0.2.0\board' folder contains only one file 'olimex_sam7_s256.cfg' ( contained in .zip file) and 'C:\Program Files\OpenOCD\0.2.0\target' folder contains only 'sam7s256.cfg' (contained in .zip file ) Then I connected the Olimex ARM-USB-TINY hardware to the PC. When it prompted to locate the driver I manually gave the path 'C:\Program Files\OpenOCD\0.2.0\drivers' First time it tells that drivers are loaded successfully and it prompts again for the location of the driver. I gave the same location again but it says 'could not find the driver software' for this device. Regards Rohit
0.2.0.rar
Description: Binary data
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
