ouch!

I think gmail broken a line, I am sending it again attached.

On Sat, Nov 1, 2008 at 10:03 PM, Alan Carvalho de Assis
<[EMAIL PROTECTED]> wrote:
> Hi Rick,
>
> On Sat, Nov 1, 2008 at 9:41 PM, Rick Altherr <[EMAIL PROTECTED]> wrote:
>>
>> Could you update this to the new target syntax?  It should be something
>> like:
>>
>> target create target0 arm926ejs -endianess little -chain-position 1 -variant
>> arm926ejs
>>
>
> Sure, please find it below:
>
> diff -Naur a/src/target/target/imx27.cfg b/src/target/target/imx27.cfg
> --- a/src/target/target/imx27.cfg       1969-12-31 21:00:00.000000000 -0300
> +++ b/src/target/target/imx27.cfg       2008-11-01 21:58:37.000000000 -0200
> @@ -0,0 +1,12 @@
> +#use combined on interfaces or targets that can't set TRST/SRST separately
> +reset_config trst_and_srst
> +
> +# There are 2 taps on the chip:
> +# The ETM
> +jtag_device 4 0x1 0xf 0xe
> +# The ARM926EJS
> +jtag_device 4 0x1 0xf 0xe
> +
> +# Note above there are 2 taps (#0 and #1) the ARM926 is the 2nd tap (ie #1)
> +target create target0 arm926ejs -endianess little -chain-position 1
> -variant arm926ejs
> +
>
> Thank you,
>
> Alan
>
diff -Naur a/src/target/target/imx27.cfg b/src/target/target/imx27.cfg
--- a/src/target/target/imx27.cfg	1969-12-31 21:00:00.000000000 -0300
+++ b/src/target/target/imx27.cfg	2008-11-01 21:58:37.000000000 -0200
@@ -0,0 +1,12 @@
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+
+# There are 2 taps on the chip:
+# The ETM
+jtag_device 4 0x1 0xf 0xe
+# The ARM926EJS
+jtag_device 4 0x1 0xf 0xe
+
+# Note above there are 2 taps (#0 and #1) the ARM926 is the 2nd tap (ie #1)
+target create target0 arm926ejs -endianess little -chain-position 1 -variant arm926ejs
+
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development

Reply via email to