Hi, This is a config file to iMX27:
diff -Naur a/src/target/target/imx27.cfg b/src/target/target/imx27.cfg --- a/src/target/target/imx27.cfg 1969-12-31 21:00:00.000000000 -0300 +++ b/src/target/target/imx27.cfg 2008-11-01 12:52:30.000000000 -0200 @@ -0,0 +1,12 @@ +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst + +# There are 2 taps on the chip: +# The ETM +jtag_device 4 0x1 0xf 0xe +# The ARM926EJS +jtag_device 4 0x1 0xf 0xe + +# Note above there are 2 taps (#0 and #1) the ARM926 is the 2nd tap (ie #1) +target arm926ejs little 1 arm926ejs + This patch is based on previous config file posted by Duane. We (me, Fabio and Rogerio) got iMX27ADS board working fine with this config file. I wrote a step-by-step tutorial and a simple ledtest application to demonstrate it working: http://www.imxdev.org/wiki/index.php?title=I.MX27_ADS_Board_JTAG_OpenOCD Best Regards, Alan _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
