On Nov 1, 2008, at 8:07 AM, Alan Carvalho de Assis wrote:
Hi, This is a config file to iMX27: diff -Naur a/src/target/target/imx27.cfg b/src/target/target/imx27.cfg--- a/src/target/target/imx27.cfg 1969-12-31 21:00:00.000000000 -0300 +++ b/src/target/target/imx27.cfg 2008-11-01 12:52:30.000000000 -0200@@ -0,0 +1,12 @@+#use combined on interfaces or targets that can't set TRST/SRST separately+reset_config trst_and_srst + +# There are 2 taps on the chip: +# The ETM +jtag_device 4 0x1 0xf 0xe +# The ARM926EJS +jtag_device 4 0x1 0xf 0xe ++# Note above there are 2 taps (#0 and #1) the ARM926 is the 2nd tap (ie #1)+target arm926ejs little 1 arm926ejs +
Could you update this to the new target syntax? It should be something like:
target create target0 arm926ejs -endianess little -chain-position 1 - variant arm926ejs
This patch is based on previous config file posted by Duane. We (me, Fabio and Rogerio) got iMX27ADS board working fine with this config file. I wrote a step-by-step tutorial and a simple ledtest application to demonstrate it working: http://www.imxdev.org/wiki/index.php?title=I.MX27_ADS_Board_JTAG_OpenOCD Best Regards, Alan _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
-- Rick Altherr [EMAIL PROTECTED]"He said he hadn't had a byte in three days. I had a short, so I split it with him."
-- Slashdot signature
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
