The link tell you to get megaraid controller
Sent from my iPad Hung-Sheng Tsao ( LaoTsao) Ph.D On May 27, 2011, at 11:25 AM, Pete Ashdown <pashd...@xmission.com> wrote: > On 05/27/2011 02:10 AM, Mark wrote: >> On 26/05/2011 9:13 a.m., Pete Ashdown wrote: >>> I'm having trouble figuring out how to hotswap dead drives on a potential >>> fileserver I am building. I'm using an LSI Internal SATA/SAS 9211-8i& >>> 9211-4i to connect 12 SATA drives on a Supermicro backplane that supports >>> SES-2. I am finding conflicting information as to whether OpenIndiana can >>> light the bay LED of the failed drive on command. If it can, how do I >>> do it? >>> If it can't, how do I identify which bay to swap the drive out of? >>> Right now >>> I've got a mapping of drive serial #'s to bays, but that isn't ideal for a >>> group of admins to execute upon. >>> >>> Also, although the backplane supports SES-2, I'm not seeing >>> /dev/es/ses0. I >>> installed system/io/tests, but I don't have sestopo in that package. >>> >> >> The LSI SAS2 hba controllers don't seem to have ses2 support at present. >> As far as I could tell, the ses functionality isn't present in the >> firmware or drivers of the sas2 products. >> >> see http://kb.lsi.com/KnowledgebaseArticle15874.aspx >> > > Any recommendations for a 2U SAS/SATA controller that does have ses2? > > > _______________________________________________ > OpenIndiana-discuss mailing list > OpenIndiana-discuss@openindiana.org > http://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss
