On 05/27/2011 02:10 AM, Mark wrote: > On 26/05/2011 9:13 a.m., Pete Ashdown wrote: >> I'm having trouble figuring out how to hotswap dead drives on a potential >> fileserver I am building. I'm using an LSI Internal SATA/SAS 9211-8i& >> 9211-4i to connect 12 SATA drives on a Supermicro backplane that supports >> SES-2. I am finding conflicting information as to whether OpenIndiana can >> light the bay LED of the failed drive on command. If it can, how do I >> do it? >> If it can't, how do I identify which bay to swap the drive out of? >> Right now >> I've got a mapping of drive serial #'s to bays, but that isn't ideal for a >> group of admins to execute upon. >> >> Also, although the backplane supports SES-2, I'm not seeing >> /dev/es/ses0. I >> installed system/io/tests, but I don't have sestopo in that package. >> > > The LSI SAS2 hba controllers don't seem to have ses2 support at present. > As far as I could tell, the ses functionality isn't present in the > firmware or drivers of the sas2 products. > > see http://kb.lsi.com/KnowledgebaseArticle15874.aspx >
Any recommendations for a 2U SAS/SATA controller that does have ses2?
signature.asc
Description: OpenPGP digital signature
_______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss
