On 19/03/2019 1:09 am, Florian Fainelli wrote:
On 3/17/19 7:11 PM, Phil Reid wrote:
On 16/03/2019 5:58 am, Florian Fainelli wrote:
On 3/15/19 1:52 AM, Phil Reid wrote:
G'day All,
I've just update from kernel 4.19 to 5.0 on a custom board that has a
marvell
dsa mv88e6085 and the phy on the mv88e6085 will only connect at
10Mb/s with
the above mentioned patch applied.
Bisecting the issue lead me to the following patch.
d6ab93364734bd (net: phy: marvell: Avoid unnecessary soft reset)
Revert the patch, and the associated build fix
4b1bd6976945417 (net: phy: marvell: Fix build.)
restores connections to 1Gb/s.
Anyone have any thoughts as to the correct fix?
What is the PHY OUI (MII_PHYSID1/ID2) for that PHY? We may need to add a
specific entry in drivers/net/phy/marvell.c to restore the software
reset to commit changes to the register.
G'day Florian,
OUI is 0x005043
Model is 101011
Phy1ID: 0x0141
Phy2ID: 0x0eb1
The running phy driver is "Marvell 88E1540"
Thanks, you mentioned a mv88e6085 but that chip is a 10/100 switch, did
you mean that the mv88e6085 compatible string is used in Device Tree to
designate that chip? While the 88E1540 driver is picked up, that driver
is originally for external PHY packages (AFAICT), so there could be some
switch-specific integration of this PHY that makes it behave
differently, having the OUI helps narrow down what might be necessary to
accomplish.
FWIW, the changes were originally tested with a 88e6352.
Oops yes that's the compatible string.
Mfr Code we purchased was 88E6352-A1-TFJ2I000
The switch id registers (0x03) returns 0x3521
Odd it works ok for others.
Here's the relevant dmesgs (with the patch reverted)
[ 1.332652] bus: 'mdio_bus': add driver mv88e6085
[ 1.368572] bus: 'mdio_bus': driver_probe_device: matched device stmmac-0:00
with driver mv88e6085
[ 1.368584] bus: 'mdio_bus': really_probe: probing driver mv88e6085 with
device stmmac-0:00
[ 1.368603] mv88e6085 stmmac-0:00: no pinctrl handle
[ 1.368630] mv88e6085 stmmac-0:00: GPIO lookup for consumer reset
[ 1.368638] mv88e6085 stmmac-0:00: using device tree for GPIO lookup
[ 1.368687] mv88e6085 stmmac-0:00: using lookup tables for GPIO lookup
[ 1.368696] mv88e6085 stmmac-0:00: No GPIO consumer reset found
[ 1.368835] mv88e6085 stmmac-0:00: switch 0x3520 detected: Marvell 88E6352,
revision 1
[ 1.401845] mdio_bus stmmac-0:00: Driver mv88e6085 requests probe deferral
[ 2.497476] bus: 'mdio_bus': driver_probe_device: matched device stmmac-0:00
with driver mv88e6085
[ 2.497486] bus: 'mdio_bus': really_probe: probing driver mv88e6085 with
device stmmac-0:00
[ 2.497505] mv88e6085 stmmac-0:00: no pinctrl handle
[ 2.497536] mv88e6085 stmmac-0:00: GPIO lookup for consumer reset
[ 2.497544] mv88e6085 stmmac-0:00: using device tree for GPIO lookup
[ 2.497595] mv88e6085 stmmac-0:00: using lookup tables for GPIO lookup
[ 2.497604] mv88e6085 stmmac-0:00: No GPIO consumer reset found
[ 2.497750] mv88e6085 stmmac-0:00: switch 0x3520 detected: Marvell 88E6352,
revision 1
[ 2.862241] mv88e6085 stmmac-0:00 lan1 (uninitialized): PHY
[!soc!ethernet@ff702000!mdio!switch0@0!mdio:02] driver [Marvell 88E1540]
[ 2.884968] mv88e6085 stmmac-0:00 lan2 (uninitialized): PHY
[!soc!ethernet@ff702000!mdio!switch0@0!mdio:03] driver [Marvell 88E1540]
[ 2.905318] mv88e6085 stmmac-0:00 lan3 (uninitialized): PHY
[!soc!ethernet@ff702000!mdio!switch0@0!mdio:04] driver [Marvell 88E1540]
[ 2.917034] driver: 'mv88e6085': driver_bound: bound to device 'stmmac-0:00'
[ 2.917127] bus: 'mdio_bus': really_probe: bound device stmmac-0:00 to
driver mv88e6085
[ 8.293526] mv88e6085 stmmac-0:00 lan3: configuring for phy/ link mode
[ 8.305856] mv88e6085 stmmac-0:00 lan2: configuring for phy/ link mode
[ 8.325009] mv88e6085 stmmac-0:00 lan1: configuring for phy/ link mode
[ 8.342635] mv88e6085 stmmac-0:00 wifi: configuring for fixed/ link mode
[ 8.358912] mv88e6085 stmmac-0:00 wifi: Link is Up - 100Mbps/Full - flow
control off
[ 12.034974] mv88e6085 stmmac-0:00 lan1: Link is Up - 1Gbps/Full - flow
control rx/tx
--
Regards
Phil
