Mike, Have any suggestion on a meter for CWDM and DWDM that is low cost?
On Mon, Jun 19, 2017 at 2:45 PM, Mike Hammett <na...@ics-il.net> wrote: > Verify the wavelengths passed by the 1310 port. Verify the wavelengths > used by his existing 40G optic. Plug the 40G optic into the 1310 port. > > > > > ----- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > Midwest-IX > http://www.midwest-ix.com > > ----- Original Message ----- > > From: "Luke Guillory" <lguill...@reservetele.com> > To: "Faisal Imtiaz" <fai...@snappytelecom.net> > Cc: "nanog list" <nanog@nanog.org> > Sent: Monday, June 19, 2017 2:39:00 PM > Subject: RE: DWDM Mux/Demux using 40G Optics > > And how would he pass his current 40g through that mux? Unless I'm > misreading your email which I took as he can use his current setup along > with a 40g 1310, though I'm thinking you're saying he can use 1310 40g with > colored up 10gs alongside of it. > > > > -----Original Message----- > From: Faisal Imtiaz [mailto:fai...@snappytelecom.net] > Sent: Monday, June 19, 2017 2:27 PM > To: Luke Guillory > Cc: Colton Conor; nanog list > Subject: Re: DWDM Mux/Demux using 40G Optics > > Bench test of the system, with the muxes... > > sorry for the large pictures :) > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 > > Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net > > ----- Original Message ----- > > From: "Luke Guillory" <lguill...@reservetele.com> > > To: "Faisal Imtiaz" <fai...@snappytelecom.net>, "Colton Conor" > > <colton.co...@gmail.com> > > Cc: "nanog list" <nanog@nanog.org> > > Sent: Monday, June 19, 2017 3:13:10 PM > > Subject: RE: DWDM Mux/Demux using 40G Optics > > > Faisal, > > > > How would he inject his current 4x10 40g into the mux which is > > currently on a single LC cable? > > > > > > > > > > > > Luke Guillory > > Network Operations Manager > > > > Tel: 985.536.1212 > > Fax: 985.536.0300 > > Email: lguill...@reservetele.com > > > > Reserve Telecommunications > > 100 RTC Dr > > Reserve, LA 70084 > > > > ______________________________________________________________________ > > ___________________________ > > > > Disclaimer: > > The information transmitted, including attachments, is intended only > > for the > > person(s) or entity to which it is addressed and may contain > > confidential and/or privileged material which should not disseminate, > > distribute or be copied. Please notify Luke Guillory immediately by > > e-mail if you have received this e-mail by mistake and delete this > > e-mail from your system. E-mail transmission cannot be guaranteed to > > be secure or error-free as information could be intercepted, > > corrupted, lost, destroyed, arrive late or incomplete, or contain > > viruses. Luke Guillory therefore does not accept liability for any > > errors or omissions in the contents of this message, which arise as a > result of e-mail transmission. . > > > > -----Original Message----- > > From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Faisal > > Imtiaz > > Sent: Monday, June 19, 2017 2:02 PM > > To: Colton Conor > > Cc: nanog list > > Subject: Re: DWDM Mux/Demux using 40G Optics > > > > Answers in-line below. > > > > > > > > If you look at the CWDM Muxes (8 or 9 channel) you will notice a > > common configuration of > > > > Upgrade Port (expansion port) + 1450 or 1470 to 1610nm > > > > in the DWDM muxes you will see them listed as # of Port + 1310 pass thru > > channel. > > > > These are exactly what you are looking for ..... :) > >