I tried to send some pictures, but looks like the message got stuck for moderator.
Here is a link to pictures what Colton is trying to accomplish.... (my bench test :) ) https://1drv.ms/a/s!Ar2zoQlxIvI1gdV9tYj96YUDWElu6w Regards. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net ----- Original Message ----- > From: "Luke Guillory" <lguill...@reservetele.com> > To: "Faisal Imtiaz" <fai...@snappytelecom.net> > Cc: "Colton Conor" <colton.co...@gmail.com>, "nanog list" <nanog@nanog.org> > Sent: Monday, June 19, 2017 3:47:29 PM > Subject: RE: DWDM Mux/Demux using 40G Optics > Gotcha, figured I misread it. Sorry it's Monday. > > > > -----Original Message----- > From: Faisal Imtiaz [mailto:fai...@snappytelecom.net] > Sent: Monday, June 19, 2017 2:45 PM > To: Luke Guillory > Cc: Colton Conor; nanog list > Subject: Re: DWDM Mux/Demux using 40G Optics > > Let me try to explain better... > > All Single Mode Fiber 40g Optics are using 4 cwdm channels ... > > If you use a cwdm mux/demux with and expansion port and it is only > mux/de-muxing > 1450 to 1610 (i.e. not using the 1270-1330) you can use the expansion port to > connect the 40g Optics > > If you have a CWDM or DWDM Mux, with a specific 1310 pass thru port (Wide-band > etc... check the specs) then you can plug the 40g Optics on to that port and > it > will pass the 4 channels thru it. > > e.g. with the cwdm mux (see picture in previous post) ..you end up with 1x40g > (lane) + 8 or 9 10g (cwdm lanes). > > > > Regards. > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 > > Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net > > ----- Original Message ----- >> From: "Luke Guillory" <lguill...@reservetele.com> >> To: "Faisal Imtiaz" <fai...@snappytelecom.net> >> Cc: "Colton Conor" <colton.co...@gmail.com>, "nanog list" >> <nanog@nanog.org> >> Sent: Monday, June 19, 2017 3:39:00 PM >> Subject: RE: DWDM Mux/Demux using 40G Optics > >> And how would he pass his current 40g through that mux? Unless I'm >> misreading your email which I took as he can use his current setup >> along with a 40g 1310, though I'm thinking you're saying he can use >> 1310 40g with colored up 10gs alongside of it. >> >> >> >> -----Original Message----- >> From: Faisal Imtiaz [mailto:fai...@snappytelecom.net] >> Sent: Monday, June 19, 2017 2:27 PM >> To: Luke Guillory >> Cc: Colton Conor; nanog list >> Subject: Re: DWDM Mux/Demux using 40G Optics >> >> Bench test of the system, with the muxes... >> >> sorry for the large pictures :) >> >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> Miami, FL 33155 >> Tel: 305 663 5518 x 232 >> >> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net >> >> ----- Original Message ----- >>> From: "Luke Guillory" <lguill...@reservetele.com> >>> To: "Faisal Imtiaz" <fai...@snappytelecom.net>, "Colton Conor" >>> <colton.co...@gmail.com> >>> Cc: "nanog list" <nanog@nanog.org> >>> Sent: Monday, June 19, 2017 3:13:10 PM >>> Subject: RE: DWDM Mux/Demux using 40G Optics >> >>> Faisal, >>> >>> How would he inject his current 4x10 40g into the mux which is >>> currently on a single LC cable? >>> >>> >>> >>> >>> >>> Luke Guillory >>> Network Operations Manager >>> >>> Tel: 985.536.1212 >>> Fax: 985.536.0300 >>> Email: lguill...@reservetele.com >>> >>> Reserve Telecommunications >>> 100 RTC Dr >>> Reserve, LA 70084 >>> >>> _____________________________________________________________________ >>> _ >>> ___________________________ >>> >>> Disclaimer: >>> The information transmitted, including attachments, is intended only >>> for the >>> person(s) or entity to which it is addressed and may contain >>> confidential and/or privileged material which should not disseminate, >>> distribute or be copied. Please notify Luke Guillory immediately by >>> e-mail if you have received this e-mail by mistake and delete this >>> e-mail from your system. E-mail transmission cannot be guaranteed to >>> be secure or error-free as information could be intercepted, >>> corrupted, lost, destroyed, arrive late or incomplete, or contain >>> viruses. Luke Guillory therefore does not accept liability for any >>> errors or omissions in the contents of this message, which arise as a >>> result of e-mail transmission. . >>> >>> -----Original Message----- >>> From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Faisal >>> Imtiaz >>> Sent: Monday, June 19, 2017 2:02 PM >>> To: Colton Conor >>> Cc: nanog list >>> Subject: Re: DWDM Mux/Demux using 40G Optics >>> >>> Answers in-line below. >>> >>> >>> >>> If you look at the CWDM Muxes (8 or 9 channel) you will notice a >>> common configuration of >>> >>> Upgrade Port (expansion port) + 1450 or 1470 to 1610nm >>> >>> in the DWDM muxes you will see them listed as # of Port + 1310 pass thru >>> channel. >>> > > > These are exactly what you are looking for ..... :)
