And how would he pass his current 40g through that mux? Unless I'm misreading your email which I took as he can use his current setup along with a 40g 1310, though I'm thinking you're saying he can use 1310 40g with colored up 10gs alongside of it.
-----Original Message----- From: Faisal Imtiaz [mailto:fai...@snappytelecom.net] Sent: Monday, June 19, 2017 2:27 PM To: Luke Guillory Cc: Colton Conor; nanog list Subject: Re: DWDM Mux/Demux using 40G Optics Bench test of the system, with the muxes... sorry for the large pictures :) Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net ----- Original Message ----- > From: "Luke Guillory" <lguill...@reservetele.com> > To: "Faisal Imtiaz" <fai...@snappytelecom.net>, "Colton Conor" > <colton.co...@gmail.com> > Cc: "nanog list" <nanog@nanog.org> > Sent: Monday, June 19, 2017 3:13:10 PM > Subject: RE: DWDM Mux/Demux using 40G Optics > Faisal, > > How would he inject his current 4x10 40g into the mux which is > currently on a single LC cable? > > > > > > Luke Guillory > Network Operations Manager > > Tel: 985.536.1212 > Fax: 985.536.0300 > Email: lguill...@reservetele.com > > Reserve Telecommunications > 100 RTC Dr > Reserve, LA 70084 > > ______________________________________________________________________ > ___________________________ > > Disclaimer: > The information transmitted, including attachments, is intended only > for the > person(s) or entity to which it is addressed and may contain > confidential and/or privileged material which should not disseminate, > distribute or be copied. Please notify Luke Guillory immediately by > e-mail if you have received this e-mail by mistake and delete this > e-mail from your system. E-mail transmission cannot be guaranteed to > be secure or error-free as information could be intercepted, > corrupted, lost, destroyed, arrive late or incomplete, or contain > viruses. Luke Guillory therefore does not accept liability for any > errors or omissions in the contents of this message, which arise as a result > of e-mail transmission. . > > -----Original Message----- > From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Faisal > Imtiaz > Sent: Monday, June 19, 2017 2:02 PM > To: Colton Conor > Cc: nanog list > Subject: Re: DWDM Mux/Demux using 40G Optics > > Answers in-line below. > > > > If you look at the CWDM Muxes (8 or 9 channel) you will notice a > common configuration of > > Upgrade Port (expansion port) + 1450 or 1470 to 1610nm > > in the DWDM muxes you will see them listed as # of Port + 1310 pass thru > channel. > > These are exactly what you are looking for ..... :)
