Hi Ross, I've found these Mikrotik devices to be excellent and reliable:
CRS310-8G+2S+IN: 8 x 2.5G copper ethernet ports, 2 x SFP+ cages, rack-mountable. Uses a single DC barrel-jack. https://mikrotik.com/product/crs310_8g_2s_in CRS305-1G-4S+IN: 4 x SFP+ cages, dual DC barrel-jack ports for redundant power, 1 x 1G copper ethernet port for OOB management. https://mikrotik.com/product/crs305_1g_4s_in CRS310-1G-5S-4S+OUT: 4 x SFP+ cages, 5 x SFP cages, 1 x 1G copper ethernet port for OOB management, can be mounted outdoors. https://mikrotik.com/product/netfiber_9 MSRP on all three are at or below $249.00 so are priced quite reasonably. If you only need SFP+ cages I'd opt for the CRS305-1G-4S+IN. Regards, Christopher Hawker ________________________________ From: NANOG <nanog-bounces+chris=thesysadmin...@nanog.org> on behalf of Ross Tajvar <r...@tajvar.io> Sent: Thursday, November 23, 2023 3:41 PM To: North American Network Operators' Group <nanog@nanog.org> Subject: CPE/NID options I'm evaluating CPEs for one of my clients, a regional ISP. Currently, we're terminating the customer's service (L3) on our upstream equipment and extending it over our own fiber to the customer's premise, where it lands in a Juniper EX2200 or EX2300. At a previous job, I used Accedian's ANTs on the customer prem side. I like the ANT because it has a small footprint with only 2 ports, it's passively cooled, it's very simple to operate, it's controlled centrally, etc. Unfortunately, when I reached out to Accedian, they insisted that the controller (which is required) started at $30k, which is a non-starter for us. I'm not aware of any other products like this. Does anyone have a recommendation for a simple L2* device to deploy to customer premises? Not necessarily the exact same thing, but something similarly-featured would be ideal. *I'm not sure if the ANT is exactly "layer 2", but I don't know what else to call it.
