On 12/18/2016 12:53 AM, Bernhard Praschinger wrote: >> What was the setting when you did record the audio signal ? I would >> guess that it was mono and 8Bit Samples and 44.1kHz samplerate. I >> haven't seen such a setup long time ago. It can be that lavplay/glav >> have problems (=bug) playing such a audio stream back. Can you try >> recording in Stereo, 16Bit and 44.1kHz ? And see if that makes any >> difference ? I just tested it with stereo setting, lavinfo shows what you would expect, yet still no sound, just a loud pop when I start play back and then deaf. I can email you the clip (only 8 Meg) or put it on my dropboz - just to make sure it is not the clip. At any rate the clip plays well in xine with sound. I also changed xine setting to use oss and it made no difference, xine plays it well. In a previous message you suggested to check mixer setting. aumix shows that PCM is on, besides, both xmms or xine plays audio files perfectly through my speakers connected to line output. > I'm away from home till early March. Will do this test then and report > on the result. I did come back in March but have been busy with other stuff
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users
