Hi Ronald, On 3/31/07, Ronald S. Bultje <[EMAIL PROTECTED]> wrote:
> > Trying to load the zr36067 kernel module and I get the following: > [..] > > # modprobe zr36067 card=7 default_norm=0 default_input=0 debug=4 > > FATAL: Error inserting zr36067 > > (/lib/modules/2.6.18.8-0.1-default/kernel/drivers/media/video/ > > zr36067.ko): > > No such device > [..] > > Buz[0]: Initializing i2c bus... > > i2c-algo-bit.o: (0) scl=1, sda=1 > > i2c-algo-bit.o: (1) scl=0, sda=0 > > i2c-algo-bit.o: SCL unexpected low while pulling SDA low! > > Buz[0]: find_zr36057() - can't initialize i2c bus > > - what kind of motherboard do you run this on? What kind of chipset > is that based on? > - did you try the card in another computer or in another pci slot in > this computer (is it sharing IRQs (/proc/interrupts)?)? > - did you try playing with noapic or acpi=off kernel boot parameters? > - did you try changing pci bus latency? I have now tried booting with noapic but I still have the same problem. The only thing I have not tried is changing pci bus latency but I have no idea where or how I do that. I can't see anything in the BIOS to set this and nothing is glaringly obvious to me in kernel parameters. Thanks, Steve -- Steve Rooke - ZL3TUV & G8KVD Death is the avalanche that encompasses us in the warm embrace of icy nothingness ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users
