Trying to load the zr36067 kernel module and I get the following:

# modprobe zr36067 card=7 default_norm=0 default_input=0 debug=4
FATAL: Error inserting zr36067
(/lib/modules/2.6.18.8-0.1-default/kernel/drivers/media/video/zr36067.ko):
No such device

dmesg shows:

Zoran MJPEG board driver version 0.9.5
MJPEG[0]: Zoran ZR36067 (rev 2) irq: 185, memory: 0xde001000
MJPEG[0]: subsystem vendor=0x13ca id=0x4231
Buz[0]: Initializing i2c bus...
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=0, sda=0
i2c-algo-bit.o: SCL unexpected low while pulling SDA low!
Buz[0]: find_zr36057() - can't initialize i2c bus
No known MJPEG cards found.

I've tried setting the card parm to all integer values just to see if that
will work but no dice.

lspci -v output gives

02:09.0 Multimedia video controller: Zoran Corporation ZR36057PQC Video
cutting chipset (rev 02)
       Subsystem: Iomega Corporation JPEG/TV Card
       Flags: bus master, fast devsel, latency 32, IRQ 185
       Memory at de001000 (32-bit, non-prefetchable) [size=4K]

OS is openSUSE 10.2 and uname -r gives (which is the latest):

2.6.18.8-0.1-default

It's confusing that lspci shows the chip as being ZR36057 but I have checked
the board and it is definitely a ZR36067. I there anything else I should be
doing? i2c_core is loaded as a module in this kernel. I have no idea what
the i2c error is, although the source flags it to be just a warning message.
I'm getting nowhere on the Net.

Thanks,
Steve
--
Steve Rooke - ZL3TUV & G8KVD
Death is the avalanche that encompasses us in the warm embrace of icy
nothingness
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Mjpeg-users mailing list
Mjpeg-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mjpeg-users

Reply via email to