Re: [Mjpeg-users] DC30+ can't capture size greater than 224x168

[Thierry Salmon]

Hi Ronald Ronald Bultje wrote: Hi Thierry, On Tue, 2003-09-23 at 11:36, Thierry Salmon wrote: Did you recompile the driver itself with bigphysarea support? The error messages from 'dmesg' indicate that the driver is compiled without bigphysarea support. normally yes, else my subkernelversion (-4) doesn't match I will try recompile this evening Please do. A simple "make clean && make" should be enough. Then, re-load the driver and it should work. Ronald I have done make clean && make and ============================================================== catpure with xawtv movie driver = Microsoft AVI (Riff) audio format = 16bit stereo (LE) sample rate = 44100 video fromat = 24 bit TrueColor (LE : bgr) frames/sec = 25.0 fps video size 384x288                                                                                                                     works, other video size and snap jpeg (max size) too                                                                                                                     ============================================================== catpure with xawtv movie driver = Microsoft AVI (Riff) audio format = 16bit stereo (LE) sample rate = 44100 video fromat = MJPEG (AVI)             <------------------- frames/sec = 25.0 fps video size 384x288                                                                                                                     gives : error [init]                                                                                                                     ioctl: VIDIOCMCAPTURE(Frame=0;height=24;width=48;format=13): Invalid argument no way to get: 384x288 MJPEG (AVI)                                                                                                                     DC30plus[0]: VIDIOCGCAP DC30plus[0]: VIDIOCSPICT - bri=32768, hue=32768, col=32768, con=32768, dep=32, pal=5 DC30plus[0]: VIDIOCSWIN - x=5, y=457, w=384, h=288, clipcount=0 DC30plus[0]: set_vfe() - width = 384, height = 288 DC30plus[0]: VIDIOCGCAP DC30plus[0]: VIDIOCGCAP DC30plus[0]: VIDIOCMCAPTURE - frame=0, geom=48x24, fmt=13 DC30plus[0]: v4l_grab() - wrong bytes-per-pixel format                                                                                                                     ======================================================================= Thanks for the help, and the work you do PS:When do you plan release 0.9.5 ? -- Best regards Thierry SALMON e-mail : [EMAIL PROTECTED] Could you confirm reception of the message by replying e-mail ****************************************************************************************************** This message and any attachments (the "message") are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. E-mails are susceptible to alteration. Neither The Sender nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified. ******************************************************************************************************