Hallo > It seems that the DC10 cannot properly handle smal fluctuations in the 5V > line. This line can get polluted by other devices in your PC, especially > by some graphic cards or the voltage regulators that feed your processor. > You can try swapping PCI cards and see if this works. If it is your > motherboard and you feel brave ;-) you can put an extra capacitator on the > DC10+ board. This will filter the 5V analog line for the SAA7110 chip. You > can find instructions how to do this on the Pinnacle forum. Just search > for "diagonal lines" or "diagonal bands". It is not an easy job and your > warranty is gone, but it really works. Have you tried changeing the power supply ot one that ist better (more output power) ?
If you know where, soldering should be no problem. But don't add a to large capacitor auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
