I capture video with my elsa erazor III VIVO (nvidia) card, using videodevX (V4L2) and rivatv + vpx???.o (encoding chipset on my card) module, using lavrec --software-encoding works fine !.
Rett Walters wrote:
I sorry I don't have any input to this issue, but I was under the impression the MJPEG tools wasn't compatible with V4L2 yet, and had been told by people on this list. Is this not the case? It appears that this person (Chris BW) is using V4L2 and Mjpegtools.....Rett Walters Chris BW ([EMAIL PROTECTED]) wrote:Bernhard Thanks for your reply - I haven't had a chance to try this yet but my setup doesn't seem to allow me to save audio at anything other than 48Khz (Dolby Digital ?) If I try at a lower level eg. 44.1 Khz then lavrec falls over saying it was unable to set the audio to this rate. This doesn't appear to cause a problem though - as the other tools reduce it to 44.1Khz before it gets burnt to VCD. My soundcard is the one which is bundled with the Asus A7N266-E motherboard using the Nvidia NForce chipset. Also attached XP1800+ & 512MB ram. More testing... Chris. Bernhard Praschinger wrote:HalloI have finally got round to attemting to transfer some old tapes to CD/DVD with the mjpegtools. This has all been made possible by the new release of the zoran driver - version 0.9.1 - seems to work very well with my setup. (Well done Ronald !) I also decided to use the v4l2 interface by applying Kraxels patch to my kernel (from http://www.bytesex.org). All appeared to be working OK - it allows me to have the Xawtv screen displayed whilst I am doing the lavrec recording process. Theres just one problem - after about 18 minutes of recording lavrec falls over with an error saying that it is unable to sync on a buffer. Exact messages below : root@localhost space2]# lavrec -w -fa -ip -d2 -q95 -l80 -Rl -a16 -r48000 -s -v1 fastep1%02d.avi[...]The files produced are readable & playable using glav/lavplay but I can't seem to make any progress with the problem.To check if it is a problem with opening and closing the files use it once with the option: --max-file-size and use a value of 100 (MB) so lavrec closes and opend a new file every 100MB. Why are you using a samplearte of 48kHz ? Can you go down for testing purposes to 44.kHz. auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
