Thanx for your help. In a leap of faith I just ordered a SuperMicro X5DAL-G, a dual Xeon mobo based on the new Intel E7505 chipset. Among other things, I'm anxious to get my Buz working - wish me luck!
Randy On Wed, 2003-02-05 at 08:05, Ronald Bultje wrote: > Hi Randy, > > On Tue, 2003-02-04 at 00:50, Randy Broman wrote: > > 1) From the nature of the error messages, ie. "i2c-algo-bit.o: Buz[0] > > SCL unexpected low while pulling SDA low!" What does this mean? Is it > > likely a problem with VIA vs a problem with the Buz card itself? > > Probably that it can't read the current values off the Buz at all... > > > 2) If VIA is bad .... what's the *best* chipset/mobo to make my > > Buz work (I'm fine to get Intel or whatever - I'd like to stay > > away from higher priced solutions like ServerWorks ....) > > People seem to like SiS based boards and the 440BX (Intel) boards quite > a lot here. I've had some good experience with the 440BX with P2/P3 > processors. There's some info in the FAQ (in the driver) on this too. If > you want a brand-new P4, go look for a Asus P4B533 or so, they seem to > work quite well (anyone got first-hand experience with this? I never > tried a Buz on these things). > > Ronald > > -- > Ronald Bultje <[EMAIL PROTECTED]> > Linux Video/Multimedia developer ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
