Hi Randy, On Tue, 2003-02-04 at 00:50, Randy Broman wrote: > 1) From the nature of the error messages, ie. "i2c-algo-bit.o: Buz[0] > SCL unexpected low while pulling SDA low!" What does this mean? Is it > likely a problem with VIA vs a problem with the Buz card itself?
Probably that it can't read the current values off the Buz at all... > 2) If VIA is bad .... what's the *best* chipset/mobo to make my > Buz work (I'm fine to get Intel or whatever - I'd like to stay > away from higher priced solutions like ServerWorks ....) People seem to like SiS based boards and the 440BX (Intel) boards quite a lot here. I've had some good experience with the 440BX with P2/P3 processors. There's some info in the FAQ (in the driver) on this too. If you want a brand-new P4, go look for a Asus P4B533 or so, they seem to work quite well (anyone got first-hand experience with this? I never tried a Buz on these things). Ronald -- Ronald Bultje <[EMAIL PROTECTED]> Linux Video/Multimedia developer ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
