> VIA + Buz usually doesn't work OK, I had read that. Two more questions:
1) From the nature of the error messages, ie. "i2c-algo-bit.o: Buz[0] SCL unexpected low while pulling SDA low!" What does this mean? Is it likely a problem with VIA vs a problem with the Buz card itself? 2) If VIA is bad .... what's the *best* chipset/mobo to make my Buz work (I'm fine to get Intel or whatever - I'd like to stay away from higher priced solutions like ServerWorks ....) Thx, Randy On Sun, 2003-02-02 at 22:48, Ronald Bultje wrote: > Hey Randy, > > On Mon, 2003-02-03 at 04:36, Randy Broman wrote: > > I have AMD Athlon XP 2200+ on VIA KT333 motherboard, with Iomega > > BUZ card. OS is RH8.0 with custom 2.4.20 kernel. > > VIA + Buz usually doesn't work. > > > I installed > > xawtv-3.83 and driver-zoran-0.9.1. xawtv either doesn't work > > or works poorly, meaning tv image is horrible. > > You might want to try the 0.8.x driver and see if that works any better. > I suppose it won't, though, Buz + VIA is just a bad combination > (hardware). > > Ronald > > -- > Ronald Bultje <[EMAIL PROTECTED]> > Linux Video/Multimedia developer ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
