It all works now! Thanks! -----Original Message----- From: Marco Peereboom [mailto:[EMAIL PROTECTED] Sent: Thursday, November 27, 2008 3:13 PM To: Morris, Roy Cc: Morris, Roy; <misc@openbsd.org> Subject: Re: AAC 4.4
We have diagnosed that issue to a bios bug. You must have missed a step in the make release; it isn't hard to do. On Nov 27, 2008, at 1:11 PM, "Morris, Roy" <[EMAIL PROTECTED]> wrote: > sorry , in answer to my own question, UKC>disable acpi fixes > that problem .. I boot right up > > So I guess the real question becomes why didn't my cd work? I > enabled aac in both GENERIC and RAMDISK_CD and did a release .. > It's fairly obvious the GENERIC worked, based on the pxe boot > working using the kernel. > > Should I start from scratch? delete the release directory and > do it again? > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of > Morris, Roy > Sent: Thursday, November 27, 2008 1:49 PM > To: Marco Peereboom > Cc: misc@openbsd.org > Subject: Re: AAC 4.4 > > > neat, I did the pxe boot, it appears to see the 3Di now according > to the boot message, however hangs forever at .. > > "piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: > SMIiic0 at piixpm0 > > I haven't seen that before? ... neat! > > > > -----Original Message----- > From: Marco Peereboom [mailto:[EMAIL PROTECTED] > Sent: Thursday, November 27, 2008 11:08 AM > To: Morris, Roy > Cc: misc@openbsd.org > Subject: Re: AAC 4.4 > > > You must have done it wrong. Did you make a release cd? > > Try booting a bsd.rd over pxe with aac enabled. This has to work. > > On Thu, Nov 27, 2008 at 10:20:52AM -0500, Morris, Roy wrote: >> -----Original Message----- >> From: Marco Peereboom [mailto:[EMAIL PROTECTED] >> Sent: Wednesday, November 26, 2008 6:35 PM >> To: Morris, Roy >> Cc: misc@openbsd.org >> Subject: Re: AAC 4.4 >> >> >> Show me a dmesg. >> >> On Wed, Nov 26, 2008 at 03:21:35PM -0500, Morris, Roy wrote: >>> I wanted to update this for the archives. Enabling these lines in >>> the kernel does NOT allow 4.4 to see the Perc 3DI controller. The >>> 3.5-stable release that was on the box (off net) worked fine. >>> >>> I did a complete release of 4.4 with the lines enabled (uncommented) >>> and even tried UKC, but alas it's a no go. Hope this saves someone >>> some time down the road. >>> >>> Cheers >>> Roy >>> >>> >>> >>> On Tue, Nov 25, 2008 at 02:17:12PM -0500, Morris, Roy wrote: >>>> Hi, I have a need to run the adaptec 3Di, it's not really a >>>> choice at > this >>>> point. I have >>>> been doing some research in the archives and I think I need to >>>> complile > my >>> 4.4 >>>> kernel >>>> with the following two lines uncommented. Any chance someone can >>>> comment > if >>>> this >>>> sounds right? >>>> >>>> #aac* at pci? # Adaptec FSA RAID controllers >>>> #scsibus* at aac? >>>> >>>> >>>> Cheers >>>> Roy >>> >> >> Sure, here you go! As I said I have even tried the UKC> enable aac* >> >> OpenBSD 4.4-stable (RAMDISK_CD) #0: Wed Nov 26 09:23:49 EST 2008 >> > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/ > RAMDISK_CD >> cpu0: Intel(R) Pentium(R) III CPU - S 1133MHz ("GenuineIntel" 686- >> class) > 1.13 GHz >> cpu0: > FPU, > V86, > DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F > XSR,SSE >> real mem = 2146926592 (2047MB) >> avail mem = 2069417984 (1973MB) >> mainbus0 at root >> bios0 at mainbus0: AT/286+ BIOS, date 10/08/03, BIOS32 rev. 0 @ >> 0xffe90, > SMBIOS rev. 2.3 @ 0xfb1e0 (47 entries) >> bios0: vendor Dell Computer Corporation version "A11" date 10/08/2003 >> bios0: Dell Computer Corporation PowerEdge 1650 >> acpi0 at bios0: rev 0 >> acpi0: tables DSDT FACP APIC SPCR >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus 1 (PCI1) >> acpiprt2 at acpi0: bus 2 (ZION) >> acpiprt3 at acpi0: bus 3 (PCI2) >> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x4000! > 0xec000/0x4000! >> cpu0 at mainbus0 >> pci0 at mainbus0 bus 0: configuration mode 1 (no bios) >> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23 >> pci1 at pchb0 bus 1 >> em0 at pci1 dev 2 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: >> irq 7, > address 00:0f:1f:69:cc:7e >> em1 at pci1 dev 4 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: >> irq 5, > address 00:0f:1f:69:cc:7f >> ppb0 at pci1 dev 8 function 0 "Intel 80303 IOP" rev 0x01 >> pci2 at ppb0 bus 2 >> "Adaptec AIC-7899F" rev 0x01 at pci2 dev 6 function 0 not configured >> "Adaptec AIC-7899F" rev 0x01 at pci2 dev 6 function 1 not configured >> "Dell PERC 3/Di" rev 0x01 at pci1 dev 8 function 1 not configured >> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01 >> pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01 >> pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01 >> pci3 at pchb3 bus 3 >> vga1 at pci0 dev 12 function 0 "ATI Rage XL" rev 0x27 >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> pchb4 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93 >> pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: >> DMA >> atapiscsi0 at pciide0 channel 0 drive 0 >> scsibus0 at atapiscsi0: 2 targets, initiator 7 >> cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, K.9A> ATAPI 5/cdrom >> removable >> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 >> ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev >> 0x05: irq > 11, version 1.0, legacy support >> pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00 >> usb0 at ohci0: USB revision 1.0 >> uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1 >> isa0 at pcib0 >> isadma0 at isa0 >> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >> pckbc0 at isa0 port 0x60/5 >> pckbd0 at pckbc0 (kbd slot) >> pckbc0: using irq 1 for kbd slot >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 >> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 >> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec >> biomask ff4d netmask ffed ttymask ffff >> rd0: fixed, 3800 blocks >> softraid0 at root >> root on rd0a swap on rd0b dump on rd0b
