Re: OpenBSD and HP Proliant DL320/DL360 G5

Tue, 16 Sep 2008 03:53:18 -0700 

On Sep 15, 2008, at 7:39 PM, Rui Miguel Silva Seabra wrote:


On Mon, Sep 15, 2008 at 06:16:20PM +0200, Johan Strvm wrote:

There's 4 equipments cmoprising of external and internal filters,
namely
PFe[12] and PFi[12].

PF[ei]1 have been crashing once in a while and they have exact same
dmesg output.

Depending on how soon I get to the machines, I either can't login
(no
resource available) or it's on ddb (but only recently I learned of
boot
dump so either it no longet happens after the 4.3 upgrade or I'll
have
to wait for the next time to gather more data).


Hm so the your PF[ei]1 with the same dmesg are the ones crashing?



the  other ones, PF[ie]2 never crashes?


Don't remember them crashing...


How about the dmesgs on those, are  they the same too?


PF[ei]1 => same dmesg A (modulo hw ids, like eth macs)
PF[ei]2 => same dmesg B (modulo hw ids, like eth macs)


Yeah.. The difference seems to be that the 1-boxes have some IDT
device (ppb4 at pci4 dev 2 function 0 vendor "IDT", unknown product
0x8018 rev 0x0e), whatever that is..

I see that you are using a quad intel card, are you using this the
same way Russell Howe does? those 4 plus the 2 onboard for 3 dual-link
bonds. If so, do you happen to have any performance numbers on this?
Ever used over 1GBit on a bond?





Would you mind sharing the dmesg's with me/the list?


Sure, but I suspect openbsd.org's MTA was configured to silently
drop email
from me.


Seems to be the case indeed.. Didn't get anything from the list, only
the mail in private.
I'll keep them below for the list:




Rui

########################## PFe1.dmesg ##########################


OpenBSD 4.1-current (GENERIC) #325: Mon Jul  9 15:50:39 MDT 2007
   [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz ("GenuineIntel" 686-class)
3.01 GHz
cpu0:
FPU
,V86
,DE
,PSE
,TSC
,MSR
,PAE
,MCE
,CX8
,APIC
,SEP
,MTRR
,PGE
,MCA
,CMOV
,PAT
,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,VMX,EST,TM2,CX16,xTPR
real mem  = 2145316864 (2045MB)
avail mem = 2066837504 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xee000 (67 entries)
bios0: HP ProLiant DL360 G5
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6321ESB LPC" rev
0x00)
pcibios0: PCI bus #23 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcc400/0x4000! 0xd0400/0x1800
0xe6000/0x2000!
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000P Host" rev 0xb1
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0xb1
pci1 at ppb0 bus 9
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 10
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 11
ppb3 at pci3 dev 0 function 0 vendor "IDT", unknown product 0x8018
rev 0x0e
pci4 at ppb3 bus 12
ppb4 at pci4 dev 2 function 0 vendor "IDT", unknown product 0x8018
rev 0x0e
pci5 at ppb4 bus 13
em0 at pci5 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06:
irq 10, address 00:18:fe:2e:6f:35
em1 at pci5 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06:
irq 10, address 00:18:fe:2e:6f:34
ppb5 at pci4 dev 4 function 0 vendor "IDT", unknown product 0x8018
rev 0x0e
pci6 at ppb5 bus 14
em2 at pci6 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06:
irq 7, address 00:18:fe:2e:6f:37
em3 at pci6 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06:
irq 5, address 00:18:fe:2e:6f:36
ppb6 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci7 at ppb6 bus 15
ppb7 at pci2 dev 2 function 0 "Intel 6321ESB PCIE" rev 0x01
pci8 at ppb7 bus 16
ppb8 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci9 at ppb8 bus 17
ppb9 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0xb1
pci10 at ppb9 bus 6
ciss0 at pci10 dev 0 function 0 "Hewlett-Packard Smart Array" rev
0x01: irq 5
ciss0: 1 LD, HW rev 1, FW 2.08/2.08
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.08> SCSI3 0/
direct fixed
sd0: 69973MB, 8920 cyl, 255 head, 63 sec, 512 bytes/sec, 143305920
sec total
ppb10 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0xb1
pci11 at ppb10 bus 20
ppb11 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0xb1
pci12 at ppb11 bus 23
ppb12 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0xb1
pci13 at ppb12 bus 2
ppb13 at pci13 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci14 at ppb13 bus 3
bnx0 at pci14 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 10
ppb14 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0xb1
pci15 at ppb14 bus 4
ppb15 at pci15 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci16 at ppb15 bus 5
bnx1 at pci16 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 10
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0xb1
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0xb1
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0xb1
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0xb1
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0xb1
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0xb1
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0xb1
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 7
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 10
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb16 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci17 at ppb16 bus 1
vga1 at pci17 dev 3 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x03 at pci17 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci17 dev 4 function 2 not configured
uhci4 at pci17 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: irq 11
"Hewlett-Packard IPMI" rev 0x00 at pci17 dev 4 function 6 not
configured
usb1 at uhci4: USB revision 1.0
uhub1 at usb1: Hewlett-Packard UHCI root hub, rev 1.00/1.00, addr 1
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DV-28E-V, C.AB> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb2 at uhci0: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask efe5 netmask efe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
uhub6 at uhub1 port 2: HP Virtual Hub, rev 1.10/0.01, addr 3
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
bnx1: address 00:1b:78:76:40:a2
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx0: address 00:1b:78:75:ef:32
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6

########################## PFe2.dmesg ##########################


OpenBSD 4.1-current (GENERIC) #325: Mon Jul  9 15:50:39 MDT 2007
   [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz ("GenuineIntel" 686-class)
3.01 GHz
cpu0:
FPU
,V86
,DE
,PSE
,TSC
,MSR
,PAE
,MCE
,CX8
,APIC
,SEP
,MTRR
,PGE
,MCA
,CMOV
,PAT
,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,VMX,EST,TM2,CX16,xTPR
real mem  = 2145316864 (2045MB)
avail mem = 2066837504 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xee000 (67 entries)
bios0: HP ProLiant DL360 G5
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6321ESB LPC" rev
0x00)
pcibios0: PCI bus #22 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcc400/0x4000! 0xd0400/0x1000
0xd1400/0x1000 0xd2400/0x1000 0xd3400/0x1000 0xd4400/0x1800
0xe6000/0x2000!
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000P Host" rev 0xb1
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0xb1
pci1 at ppb0 bus 9
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 10
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 11
em0 at pci3 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06:
irq 5, address 00:1b:78:57:1f:1c
em1 at pci3 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06:
irq 7, address 00:1b:78:57:1f:1d
ppb3 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci4 at ppb3 bus 14
ppb4 at pci2 dev 2 function 0 "Intel 6321ESB PCIE" rev 0x01
pci5 at ppb4 bus 15
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 16
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0xb1
pci7 at ppb6 bus 6
ciss0 at pci7 dev 0 function 0 "Hewlett-Packard Smart Array" rev
0x01: irq 5
ciss0: 1 LD, HW rev 1, FW 2.08/2.08
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.08> SCSI3 0/
direct fixed
sd0: 69973MB, 8920 cyl, 255 head, 63 sec, 512 bytes/sec, 143305920
sec total
ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0xb1
pci8 at ppb7 bus 19
em2 at pci8 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06:
irq 7, address 00:1b:78:56:84:38
em3 at pci8 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06:
irq 10, address 00:1b:78:56:84:39
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0xb1
pci9 at ppb8 bus 22
ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0xb1
pci10 at ppb9 bus 2
ppb10 at pci10 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci11 at ppb10 bus 3
bnx0 at pci11 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 10
ppb11 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0xb1
pci12 at ppb11 bus 4
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 5
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 10
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0xb1
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0xb1
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0xb1
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0xb1
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0xb1
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0xb1
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0xb1
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 7
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 10
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci14 at ppb13 bus 1
vga1 at pci14 dev 3 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x03 at pci14 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci14 dev 4 function 2 not configured
uhci4 at pci14 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: irq 10
"Hewlett-Packard IPMI" rev 0x00 at pci14 dev 4 function 6 not
configured
usb1 at uhci4: USB revision 1.0
uhub1 at usb1: Hewlett-Packard UHCI root hub, rev 1.00/1.00, addr 1
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DV-28E-V, C.AB> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb2 at uhci0: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask efe5 netmask efe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
uhub6 at uhub1 port 2: HP Virtual Hub, rev 1.10/0.01, addr 3
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
bnx1: address 00:1b:78:72:40:22
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx0: address 00:1b:78:72:40:62
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6

########################## PFi1.dmesg ##########################


OpenBSD 4.1-current (GENERIC) #325: Mon Jul  9 15:50:39 MDT 2007
   [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz ("GenuineIntel" 686-class)
3.01 GHz
cpu0:
FPU
,V86
,DE
,PSE
,TSC
,MSR
,PAE
,MCE
,CX8
,APIC
,SEP
,MTRR
,PGE
,MCA
,CMOV
,PAT
,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,VMX,EST,TM2,CX16,xTPR
real mem  = 2145316864 (2045MB)
avail mem = 2066837504 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xee000 (67 entries)
bios0: HP ProLiant DL360 G5
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6321ESB LPC" rev
0x00)
pcibios0: PCI bus #23 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcc400/0x4000! 0xd0400/0x1800
0xe6000/0x2000!
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000P Host" rev 0xb1
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0xb1
pci1 at ppb0 bus 9
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 10
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 11
ppb3 at pci3 dev 0 function 0 vendor "IDT", unknown product 0x8018
rev 0x0e
pci4 at ppb3 bus 12
ppb4 at pci4 dev 2 function 0 vendor "IDT", unknown product 0x8018
rev 0x0e
pci5 at ppb4 bus 13
em0 at pci5 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06:
irq 10, address 00:18:fe:2e:6f:e5
em1 at pci5 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06:
irq 10, address 00:18:fe:2e:6f:e4
ppb5 at pci4 dev 4 function 0 vendor "IDT", unknown product 0x8018
rev 0x0e
pci6 at ppb5 bus 14
em2 at pci6 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06:
irq 7, address 00:18:fe:2e:6f:e7
em3 at pci6 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06:
irq 5, address 00:18:fe:2e:6f:e6
ppb6 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci7 at ppb6 bus 15
ppb7 at pci2 dev 2 function 0 "Intel 6321ESB PCIE" rev 0x01
pci8 at ppb7 bus 16
ppb8 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci9 at ppb8 bus 17
ppb9 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0xb1
pci10 at ppb9 bus 6
ciss0 at pci10 dev 0 function 0 "Hewlett-Packard Smart Array" rev
0x01: irq 5
ciss0: 1 LD, HW rev 1, FW 2.08/2.08
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.08> SCSI3 0/
direct fixed
sd0: 69973MB, 8920 cyl, 255 head, 63 sec, 512 bytes/sec, 143305920
sec total
ppb10 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0xb1
pci11 at ppb10 bus 20
ppb11 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0xb1
pci12 at ppb11 bus 23
ppb12 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0xb1
pci13 at ppb12 bus 2
ppb13 at pci13 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci14 at ppb13 bus 3
bnx0 at pci14 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 10
ppb14 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0xb1
pci15 at ppb14 bus 4
ppb15 at pci15 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci16 at ppb15 bus 5
bnx1 at pci16 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 10
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0xb1
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0xb1
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0xb1
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0xb1
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0xb1
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0xb1
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0xb1
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 7
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 10
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb16 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci17 at ppb16 bus 1
vga1 at pci17 dev 3 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x03 at pci17 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci17 dev 4 function 2 not configured
uhci4 at pci17 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: irq 10
"Hewlett-Packard IPMI" rev 0x00 at pci17 dev 4 function 6 not
configured
usb1 at uhci4: USB revision 1.0
uhub1 at usb1: Hewlett-Packard UHCI root hub, rev 1.00/1.00, addr 1
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DV-28E-N, C.6C> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb2 at uhci0: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask efe5 netmask efe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
uhub6 at uhub1 port 2: HP Virtual Hub, rev 1.10/0.01, addr 3
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
bnx1: address 00:1b:78:75:bb:ae
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx0: address 00:1b:78:75:bb:cc
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6

########################## PFi2.dmesg ##########################


OpenBSD 4.1-current (GENERIC) #325: Mon Jul  9 15:50:39 MDT 2007
   [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz ("GenuineIntel" 686-class)
3.01 GHz
cpu0:
FPU
,V86
,DE
,PSE
,TSC
,MSR
,PAE
,MCE
,CX8
,APIC
,SEP
,MTRR
,PGE
,MCA
,CMOV
,PAT
,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,VMX,EST,TM2,CX16,xTPR
real mem  = 2145316864 (2045MB)
avail mem = 2066837504 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xee000 (67 entries)
bios0: HP ProLiant DL360 G5
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6321ESB LPC" rev
0x00)
pcibios0: PCI bus #23 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcc400/0x4000! 0xd0400/0x1800
0xe6000/0x2000!
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000P Host" rev 0xb1
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0xb1
pci1 at ppb0 bus 9
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 10
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 11
ppb3 at pci3 dev 0 function 0 vendor "IDT", unknown product 0x8018
rev 0x0e
pci4 at ppb3 bus 12
ppb4 at pci4 dev 2 function 0 vendor "IDT", unknown product 0x8018
rev 0x0e
pci5 at ppb4 bus 13
em0 at pci5 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06:
irq 10, address 00:18:fe:2e:6f:e5
em1 at pci5 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06:
irq 10, address 00:18:fe:2e:6f:e4
ppb5 at pci4 dev 4 function 0 vendor "IDT", unknown product 0x8018
rev 0x0e
pci6 at ppb5 bus 14
em2 at pci6 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06:
irq 7, address 00:18:fe:2e:6f:e7
em3 at pci6 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06:
irq 5, address 00:18:fe:2e:6f:e6
ppb6 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci7 at ppb6 bus 15
ppb7 at pci2 dev 2 function 0 "Intel 6321ESB PCIE" rev 0x01
pci8 at ppb7 bus 16
ppb8 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci9 at ppb8 bus 17
ppb9 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0xb1
pci10 at ppb9 bus 6
ciss0 at pci10 dev 0 function 0 "Hewlett-Packard Smart Array" rev
0x01: irq 5
ciss0: 1 LD, HW rev 1, FW 2.08/2.08
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.08> SCSI3 0/
direct fixed
sd0: 69973MB, 8920 cyl, 255 head, 63 sec, 512 bytes/sec, 143305920
sec total
ppb10 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0xb1
pci11 at ppb10 bus 20
ppb11 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0xb1
pci12 at ppb11 bus 23
ppb12 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0xb1
pci13 at ppb12 bus 2
ppb13 at pci13 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci14 at ppb13 bus 3
bnx0 at pci14 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 10
ppb14 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0xb1
pci15 at ppb14 bus 4
ppb15 at pci15 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci16 at ppb15 bus 5
bnx1 at pci16 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 10
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0xb1
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0xb1
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0xb1
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0xb1
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0xb1
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0xb1
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0xb1
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 7
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 10
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb16 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci17 at ppb16 bus 1
vga1 at pci17 dev 3 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x03 at pci17 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci17 dev 4 function 2 not configured
uhci4 at pci17 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: irq 10
"Hewlett-Packard IPMI" rev 0x00 at pci17 dev 4 function 6 not
configured
usb1 at uhci4: USB revision 1.0
uhub1 at usb1: Hewlett-Packard UHCI root hub, rev 1.00/1.00, addr 1
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DV-28E-N, C.6C> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb2 at uhci0: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask efe5 netmask efe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
uhub6 at uhub1 port 2: HP Virtual Hub, rev 1.10/0.01, addr 3
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
bnx1: address 00:1b:78:75:bb:ae
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx0: address 00:1b:78:75:bb:cc
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6

--

Today is Pungenday, the 39th day of Bureaucracy in the YOLD 3174
+ No matter how much you do, you never do enough -- unknown
+ Whatever you do will be insignificant,
| but it is very important that you do it -- Gandhi
+ So let's do it...?

Reply via email to