Johan StrC6m wrote, sometime around 15/09/08 15:46:
Well, the main questions is if DL360/DL320 & OpenBSD is working good
together, the rest is only me thinking out loud :)
They work fine for me.
I have a pair of DL320 G5 machines each with a quad port Intel Pro/1000
PT card in them and they do all our vlan routing and pass traffic off
into an OSPF area on its way to the internet.
iLO is fine - just set it up for serial console (if you want a GUI
console you have to buy an 'Advanced iLO' license, but it's really not
needed for a router box). You'll probably want to flip the iLO virtual
serial port to be the 1st serial port, just to make life simpler.
The DL320 can have proper RAID, but only if you buy an additional
controller. I use a pair of 80G SATA drives with the onboard controller
and they work fine (the box doesn't really do much disk I/O - all the
network monitoring and graphing is elsewhere).
They are quite noisy (as are most if not all 1U servers), and probably
not very power-efficient. I didn't see the problem with a single PSU
when I'm running them with CARP, pfsync, sasync and OSPF.
dmesg:
OpenBSD 4.3 (GENERIC) #1368: Wed Mar 12 11:05:31 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 534802432 (510MB)
avail mem = 507453440 (483MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xee000 (47 entries)
bios0: vendor HP version "W04" date 03/10/2007
bios0: HP ProLiant DL320 G5
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SPCR MCFG HPET SPMI APIC
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 1 (IP2P)
acpiprt1 at acpi0: bus 4 (PCXS)
acpiprt2 at acpi0: bus 3 (PCXA)
acpiprt3 at acpi0: bus 2 (ICHE)
acpiprt4 at acpi0: bus 7 (IPE4)
acpiprt5 at acpi0: bus 10 (PTA0)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 31 degC
ipmi at mainbus0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Celeron(R) D CPU 3.20GHz, 3200.52 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG
cpu0: 512KB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0xc0
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0: irq 11
pci1 at ppb0 bus 10
ppb1 at pci1 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev 0x04
pci2 at ppb1 bus 11
ppb2 at pci2 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev 0x04
pci3 at ppb2 bus 12
em0 at pci3 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: irq
11, address 00:15:17:1d:87:88
em1 at pci3 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: irq
10, address 00:15:17:1d:87:89
ppb3 at pci2 dev 1 function 0 vendor "IDT", unknown product 0x8018 rev 0x04
pci4 at ppb3 bus 13
em2 at pci4 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: irq
10, address 00:15:17:1d:87:8a
em3 at pci4 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: irq
5, address 00:15:17:1d:87:8b
ppb4 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci5 at ppb4 bus 2
ppb5 at pci5 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci6 at ppb5 bus 3
bge0 at pci6 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3
(0x9003): irq 11, address 00:1b:78:06:a9:b2
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT PHY, rev. 0
bge1 at pci6 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3
(0x9003): irq 10, address 00:1b:78:06:a9:b3
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT PHY, rev. 0
ppb6 at pci6 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
pci7 at ppb6 bus 4
ppb7 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci8 at ppb7 bus 7
ppb8 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: not
configured by system firmware
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 5
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb9 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci9 at ppb9 bus 1
vga1 at pci9 dev 3 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x03 at pci9 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci9 dev 4 function 2 not configured
uhci4 at pci9 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: irq 11
"Hewlett-Packard IPMI" rev 0x00 at pci9 dev 4 function 6 not configured
usb1 at uhci4: USB revision 1.0
uhub1 at usb1 "Hewlett-Packard UHCI root hub" rev 1.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 7 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3808110AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <ST3808110AS>
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhidev0 at uhub1 port 1 configuration 1 interface 0 "HP Virtual
Keyboard" rev 1.10/0.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "HP Virtual
Keyboard" rev 1.10/0.02 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
uhub6 at uhub1 port 2 "HP Virtual Hub" rev 1.10/0.01 addr 3
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
--
Russell Howe, IT Manager. <[EMAIL PROTECTED]>
BMT Marine & Offshore Surveys Ltd.
