Can you send me the acpidump -o mymachinename?
On Tue, Jun 24, 2008 at 08:33:03PM +1200, Richard Toohey wrote:
> On 23/06/2008, at 8:28 PM, Richard Toohey wrote:
>
>> On 13/06/2008, at 2:12 AM, Marco Peereboom wrote:
>>
>>> We are battling a few memory leaks in ACPI. This is what causes your
>>> machine to misbehave.
>>>
>>> On Thu, Jun 12, 2008 at 09:13:47PM +1200, Richard Toohey wrote:
>>>> On 12/06/2008, at 8:04 PM, Richard Toohey wrote:
>>>>>> When I press "i" for install, I get ...
>>>>>>
>>>>>> pckbc: command timeout
>>>>>>
>>>>
>>>> 4.3 CD OK.
>>>> Snapshot 27 May OK
>>>> Snapshot 03 June - problem
>>>> Snapshot 11 June - problem
>
> Stuart Henderson (thanks!) suggested disable acpiprt as a workaround
> - it works.
>
> dmesg from snapshot of 19th June below:
>
> OpenBSD 4.3-current (GENERIC) #940: Thu Jun 19 07:41:29 MDT 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz ("GenuineIntel" 686-class)
> 1.60 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,TM2,xTPR
> real mem = 258043904 (246MB)
> avail mem = 241295360 (230MB)
> User Kernel Config
> UKC> disable acpiprt
> 435 acpiprt* disabled
> UKC> quit
> Continuing...
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/14/06, BIOS32 rev. 0 @ 0xfd600,
> SMBIOS rev. 2.4 @ 0xe3810 (17 entries)
> bios0: vendor Hewlett-Packard version "F.05" date 08/14/2006
> bios0: Hewlett-Packard Presario C300 (RE024PA#ABG)
> acpi0 at bios0: rev 0
> acpi0: tables DSDT FACP APIC HPET MCFG BOOT APIC SSDT SSDT SSDT
> acpi0: wakeup devices LANC(S5) PS2K(S3) PS2M(S3)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt at acpi0 not configured
> acpiprt at acpi0 not configured
> acpiprt at acpi0 not configured
> acpiprt at acpi0 not configured
> acpiprt at acpi0 not configured
> acpiprt at acpi0 not configured
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2, C1
> acpitz0 at acpi0: critical temperature 99 degC
> acpitz1 at acpi0: critical temperature 105 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: PWRB
> acpibat0 at acpi0: BAT1 model "Primary " type Lion oem "Hewlett-Packard "
> acpiac0 at acpi0: AC unit online
> bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xe0000/0x1800!
> 0xe3800/0x800!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> agp0 at vga1: aperture at 0xc0000000, size 0x10000000
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 7
> azalia0: codec[s]: Conexant/0x5047
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 4
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: irq 11
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: irq 3
> pci3 at ppb2 bus 6
> bwi0 at pci3 dev 0 function 0 "Broadcom BCM4311" rev 0x01: irq 3bwi0: no
> BBP id for device id 0x4311
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 5
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 3
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 11
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 5
> ehci0: timed out waiting for BIOS
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
> pci4 at ppb3 bus 8
> rl0 at pci4 dev 8 function 0 "Realtek 8139" rev 0x10: irq 11, address
> 00:16:d4:9c:6c:5e
> rlphy0 at rl0 phy 0: RTL internal PHY
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM
> disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets, initiator 7
> cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDW/DVD TS-L462D, HS00> ATAPI
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> pciide0: channel 1 ignored (disabled)
> ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: irq 10,
> AHCI 1.1
> ahci0: PHY offline on port 2
> scsibus1 at ahci0: 32 targets, initiator 32
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD600BEVS-60, 01.0> SCSI3 0/direct
> fixed
> sd0: 57241MB, 7297 cyl, 255 head, 63 sec, 512 bytes/sec, 117231408 sec
> total
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 10
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 256MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> biomask ed6d netmask ed6d ttymask ff7f
> mtrr: Pentium Pro MTRR support
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
>
> Thanks.
