Compaq Presario C300 working fine with 4.2 and 4.3 BETA
(last snapshot 26th Feb - see dmesg.)
Trying to help with the testing, so booted with snapshot of
3rd June, but cannot install.
When I press "i" for install, I get ...
pckbc: command timeout
... and a never-ending repetition of "i"
This section in the working dmesg:
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
Has the third line changed when I boot off the snapshot CD:
pckbc0: unable to establish interrupt for kbd slot
I'll try a 4.3 install CD to see how that works, then a more recent
snapshot,
and do more Googling, but if anyone can point out something obvious that
I have missed/should try, please let me know.
Thanks.
OpenBSD 4.3-beta (GENERIC) #668: Tue Feb 26 05:38:01 MST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz ("GenuineIntel" 686-
class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH
,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,TM2,xTPR
real mem = 258043904 (246MB)
avail mem = 241565696 (230MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/14/06, BIOS32 rev. 0 @
0xfd600, SMBIOS rev. 2.4 @ 0xe3810 (17 entries)
bios0: vendor Hewlett-Packard version "F.05" date 08/14/2006
bios0: Hewlett-Packard Presario C300 (RE024PA#ABG)
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC HPET MCFG BOOT APIC SSDT SSDT SSDT
acpi0: wakeup devices LANC(S5) PS2K(S3) PS2M(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus 6 (RP03)
acpiprt5 at acpi0: bus 8 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1
acpitz0 at acpi0: critical temperature 99 degC
acpitz1 at acpi0: critical temperature 105 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpibat0 at acpi0: BAT1 model "Primary " type Lion oem "Hewlett-
Packard "
acpiac0 at acpi0: AC unit online
bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xe0000/0x1800!
0xe3800/0x800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
agp0 at pchb0: aperture at 0xc0000000, size 0x10000000
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01:
irq 7
azalia0: codec[s]: Conexant/0x5047
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 4
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: irq 11
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: irq 3
pci3 at ppb2 bus 6
bwi0 at pci3 dev 0 function 0 "Broadcom BCM4311" rev 0x01: irq 3bwi0:
no BBP id for device id 0x4311
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 3
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 5
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 8
rl0 at pci4 dev 8 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:16:d4:9c:6c:5e
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDW/DVD TS-L462D, HS00>
SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: irq
10, AHCI 1.1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD600BEVS-60, 01.0> SCSI3 0/
direct fixed
sd0: 57241MB, 7297 cyl, 255 head, 63 sec, 512 bytes/sec, 117231408
sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 10
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 256MB DDR2 SDRAM non-parity PC2-4200CL5 SO-
DIMM
ichiic0: exec: op 1, addr 0x56, cmdlen 1, len 0, flags 0x08: timeout,
status 0x41<BUSY,INUSE>
ichiic0: exec: op 1, addr 0x57, cmdlen 1, len 0, flags 0x08: timeout,
status 0x41<BUSY,INUSE>
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ed6d netmask ed6d ttymask ff7f
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
umass0 at uhub0 port 1 configuration 1 interface 0 "USBDisk RunDisk"
rev 2.00/0.95 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd1 at scsibus2 targ 1 lun 0: <USBDisk, RunDisk, 3.01> SCSI2 0/direct
removable
sd1: 126MB, 16 cyl, 255 head, 63 sec, 512 bytes/sec, 259776 sec total
