On 23/06/2008, at 8:28 PM, Richard Toohey wrote:
On 13/06/2008, at 2:12 AM, Marco Peereboom wrote:
We are battling a few memory leaks in ACPI. This is what causes your
machine to misbehave.
On Thu, Jun 12, 2008 at 09:13:47PM +1200, Richard Toohey wrote:
On 12/06/2008, at 8:04 PM, Richard Toohey wrote:
When I press "i" for install, I get ...
pckbc: command timeout
4.3 CD OK.
Snapshot 27 May OK
Snapshot 03 June - problem
Snapshot 11 June - problem
Stuart Henderson (thanks!) suggested disable acpiprt as a workaround
- it works.
dmesg from snapshot of 19th June below:
OpenBSD 4.3-current (GENERIC) #940: Thu Jun 19 07:41:29 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz ("GenuineIntel" 686-
class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH
,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,TM2,xTPR
real mem = 258043904 (246MB)
avail mem = 241295360 (230MB)
User Kernel Config
UKC> disable acpiprt
435 acpiprt* disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/14/06, BIOS32 rev. 0 @
0xfd600, SMBIOS rev. 2.4 @ 0xe3810 (17 entries)
bios0: vendor Hewlett-Packard version "F.05" date 08/14/2006
bios0: Hewlett-Packard Presario C300 (RE024PA#ABG)
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC HPET MCFG BOOT APIC SSDT SSDT SSDT
acpi0: wakeup devices LANC(S5) PS2K(S3) PS2M(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiprt at acpi0 not configured
acpiprt at acpi0 not configured
acpiprt at acpi0 not configured
acpiprt at acpi0 not configured
acpiprt at acpi0 not configured
acpiprt at acpi0 not configured
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1
acpitz0 at acpi0: critical temperature 99 degC
acpitz1 at acpi0: critical temperature 105 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpibat0 at acpi0: BAT1 model "Primary " type Lion oem "Hewlett-
Packard "
acpiac0 at acpi0: AC unit online
bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xe0000/0x1800!
0xe3800/0x800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xc0000000, size 0x10000000
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01:
irq 7
azalia0: codec[s]: Conexant/0x5047
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: irq 4
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: irq 11
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: irq 3
pci3 at ppb2 bus 6
bwi0 at pci3 dev 0 function 0 "Broadcom BCM4311" rev 0x01: irq 3bwi0:
no BBP id for device id 0x4311
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 3
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 5
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 8
rl0 at pci4 dev 8 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:16:d4:9c:6c:5e
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDW/DVD TS-L462D, HS00>
ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: irq
10, AHCI 1.1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets, initiator 32
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD600BEVS-60, 01.0> SCSI3 0/
direct fixed
sd0: 57241MB, 7297 cyl, 255 head, 63 sec, 512 bytes/sec, 117231408
sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 10
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 256MB DDR2 SDRAM non-parity PC2-4200CL5 SO-
DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ed6d netmask ed6d ttymask ff7f
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
Thanks.
