On Fri, Feb 15, 2008 at 12:09:43AM -0800, Pawel Veselov wrote: > On Thu, Feb 14, 2008 at 11:29 PM, Jacob Meuser <[EMAIL PROTECTED]> wrote: > > > Hi > > > I got an acomdata DVEXXU2FE enclosure, and stuffed it with SONY, DVD > > > RW DRU-510A. > > > Attempts to burn dvds fail after about 140Mb, drive simply stops and > > > becomes ready. cdrecord > > > fails after some timeout, and an unknown error code is displayed. Do I > > > get another enclosure, > > > or did I just picked a bad unit? Any feedback is greately appreciated. > > I have the same burner. > > In an enclosure? > > > > cd0 at scsibus0 targ 1 lun 0: <SONY, DVD RW DRU-510A, 1.0d> SCSI0 > > > 5/cdrom removable > > although 1.0c firmware. > > I actually had this unit for long time, connected as an IDE, never had > any problems with it. > I'm putting it in an enclosure because it started to overheat inside > the case with that new > hardware I got recently.
Perhaps the enclosure: 1. allows the drive to overheat. Does the enclosure have a fan? 2. Can't move data fast enough for the burner. What interface? > never had problem writing with that unit at top speed as IDE.... > Well, here is the cdrecord dvd, at speed#1, no better. Failed after 27Mb.
