On Feb 1, 2008 3:29 AM, Andre Naehring <[EMAIL PROTECTED]> wrote:
> On Thu, 31 Jan 2008, Richard Daemon wrote:
>
> > If you do test with standard release, please let me know the results,
> > especially if it's on a standard PC - I'm out of systems to test with...
> :-(
>
> Here it comes, the following dmesg is again from eee, installed an
> original 4.2 from cd on the usb stick.
> While trying to use the ethernet, it didn't work, I was unable to see
> the interface. According to the manual of the lii, this driver will be
> new in 4.3, so it's nice that the driver in the snapshot is already
> working.
>
> The wireless is identified as ath0 again but setting it up freezes the
> eee. This didn't happen with the snapshot, but there I was unable to set
> it, too (hardware reset...).
>
> Short description for you, I booted the 4.2 install cd i386 in a vmware
> workstation and chose sd1 as install destination. Created the same as
> with the snapshot and rebooted again. Mount the stick an changed again
> in /etc/fstab from sd1a to sd0a an the 4.2 booted on the eee.
>
> So if you want to use OpenBSD on the eee, you should take the actual
> snapshot, maybe there will be some changes according to the wireless
> driver. If someone needs tests with changed drivers or anything, I can
> take a snapshot each week an try again if the wireless starts working.
>
> Oh yes, the dmesg... (original 4.2 CD-release)
>
>
> OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class)
> 631 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
> real mem = 527527936 (503MB)
> avail mem = 502427648 (479MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 01/04/08, BIOS32 rev. 0 @ 0xf0010,
> SMBIOS rev. 2.5 @ 0xf06c0 (37 entries)
> bios0: vendor American Megatrends Inc. version "0703 " date 01/04/2008
> bios0: ASUSTeK Computer INC. 701
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf76b0/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
> pcibios0: PCI bus #5 is the last bus
> bios0: ROM list: 0xc0000/0xf800!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x04
> vga1 at pci0 dev 2 function 0 "Intel 82915GM/GMS Video" rev 0x04: aperture
> at 0xd0000000, size 0x10000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Intel 82915GM/GMS Video" rev 0x04 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: irq 5
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: Realtek/0x0662 (rev. 1.1), HDA version 1.0
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04
> pci1 at ppb0 bus 4
> ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04
> pci2 at ppb1 bus 3
> vendor "Attansic Technology", unknown product 0x2048 (class network
> subclass ethernet, rev 0xa0) at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04
> pci3 at ppb2 bus 1
> ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: irq 10
> ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR0W, address 00:15:af:75:d9:e0
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 3
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 7
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 10
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: irq 5
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: irq 3
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
> pci4 at ppb3 bus 5
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM
> disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC>
> wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors
> wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
> ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: irq 7
> iic0 at ichiic0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> biomask effd netmask effd ttymask ffff
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> umass0 at uhub0 port 3 configuration 1 interface 0
> umass0: USBest Technology USB Mass Storage Device, rev 2.00/1.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets
> sd0 at scsibus0 targ 1 lun 0: <Ut163, USB2FlashStorage, 0.00> SCSI2
> 0/direct removable
> sd0: 963MB, 122 cyl, 255 head, 63 sec, 512 bytes/sec, 1974271 sec total
> umass1 at uhub0 port 5 configuration 1 interface 0
> umass1: ENE UB6225, rev 2.00/1.00, addr 3
> umass1: using SCSI over Bulk-Only
> scsibus1 at umass1: 2 targets
> sd1 at scsibus1 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0
> 0/direct removable
> sd1: 982MB, 125 cyl, 255 head, 63 sec, 512 bytes/sec, 2012160 sec total
> dkcsum: wd0 matches BIOS drive 0x81
> dkcsum: sd0 matches BIOS drive 0x80
> dkcsum: sd1 matches BIOS drive 0x82
> root on sd0a swap on sd0b dump on sd0b
>
>
> --
>
> andre
>
>
Thank you very much for all your efforts and this, much appreciated.
Richard
