hi, after upgrading my router to -current the dsl pppoe connection does
not work anymore. userland ppp connects fine but freezes after K 30
seconds. freeze means the connection is still there no errors shown in
logs and ifconfig state is normal but there is no more incoming traffic.
the provider and modem hardware is ok since i'm connected now through a
netscreen to write this mail. i changed nothing in ppp configuration
since years and disabled pf for testing... same problem. as i can see in
source changes: not much has changed in userland ppp and nfe code since
4.1. i read in some forums that it would be better to user kernel
pppoe... so i tried to use kernel pppoe as workaround, but its does not
connect. i used following configuration in /etc/hostname.pppoe0: inet
0.0.0.0 255.255.255.255 0.0.0.1 pppoedev nfe1 \ authproto pap authname
**** authkey **** up !/sbin/route add default 0.0.0.1 and of course: "up"
in /etc/hostname.nfe1 if i enable debug i see a lot of outgoing
packages... and then a timeout after a while. reconnect and again the
same... it stays in the sppp phase of "establish connection using pap
authname ****" I'm located in germany using arcor as provider. anyone
else using dsl pppoe (kernel/userland) in current or latest snapshots -
maybe in germany with arcor? any hints are really welcome. dmesg
follows.... regards, joerg OpenBSD 4.2 (GENERIC.MP) #0: Wed Aug 8
17:31:49 CEST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem =
2145972224 (2046MB) avail mem = 2072682496 (1976MB) mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0000 (78 entries) bios0: vendor
Phoenix Technologies, LTD version "ASUS M2N32-SLI DELUXE ACPI BIOS
Revision 0603" date 06/27/2006 bios0: ASUSTeK Computer INC. M2N32-SLI
DELUXE acpi0 at mainbus0: rev 0 acpi0: tables DSDT FACP SSDT MCFG APIC
acpitimer at acpi0 not configured acpimadt0 at acpi0 addr 0xfee00000:
PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD
Athlon(tm) 64 X2 Dual Core Processor 4600+, 2411.34 MHz cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu0:
64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB
entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8
4MB entries fully associative cpu0: apic clock running at 200MHz cpu1 at
mainbus0: apid 1 (application processor) cpu1: AMD Athlon(tm) 64 X2 Dual
Core Processor 4600+, 2410.98 MHz cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu1:
64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache cpu1: ITLB 32 4KB entries fully associative, 8 4MB
entries fully associative cpu1: DTLB 32 4KB entries fully associative, 8
4MB entries fully associative ioapic0 at mainbus0 apid 2 pa 0xfec00000,
version 11, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 5 (HUB0) acpicpu
at acpi0 not configured acpicpu at acpi0 not configured acpitz at acpi0
not configured acpibtn at acpi0 not configured cpu0: PowerNow! K8 2410
MHz: speeds: 2400 2200 2000 1800 1000 MHz pci0 at mainbus0 bus 0:
configuration mode 1 "NVIDIA C51 Host" rev 0xa2 at pci0 dev 0 function 0
not configured "NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 1 not
configured "NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 2 not
configured "NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 3 not
configured "NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 4 not
configured "NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 5 not
configured "NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 6 not
configured "NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 7 not
configured ppb0 at pci0 dev 3 function 0 "NVIDIA C51 PCIE" rev 0xa1 pci1
at ppb0 bus 1 ppb1 at pci0 dev 4 function 0 "NVIDIA C51 PCIE" rev 0xa1
pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 "Intel IOP332 PCIE-PCIX"
rev 0x07 pci3 at ppb2 bus 3 arc0 at pci3 dev 14 function 0 "Areca
ARC-1210" rev 0x00: apic 2 int 11 (irq 11) arc0: 4 SATA Ports, 256MB
SDRAM, FW Version: V1.42 2006-10-13 scsibus0 at arc0: 16 targets sd0 at
scsibus0 targ 0 lun 0: SCSI3 0/direct fixed sd0: 476837MB, 56514 cyl, 36
head, 480 sec, 512 bytes/sec, 976562176 sec total ppb3 at pci2 dev 0
function 2 "Intel IOP332 PCIE-PCIX" rev 0x07 pci4 at ppb3 bus 4 "NVIDIA
MCP55 Memory" rev 0xa1 at pci0 dev 8 function 0 not configured pcib0 at
pci0 dev 9 function 0 "NVIDIA MCP55 ISA" rev 0xa2 nviic0 at pci0 dev 9
function 1 "NVIDIA MCP55 SMBus" rev 0xa2 iic0 at nviic0 adt0 at iic0 addr
0x2e: adt7475 rev 0x69 iic1 at nviic0 iic1: addr 0x18 00=f0 01=00 02=00
03=f0 04=00 05=00 06=00 07=00 08=00 09=10 10=08 11=00 12=00 13=0a 14=00
15=00 16=00 17=34 20=95 21=92 22=00 32=00 "NVIDIA MCP55 Memory" rev 0xa2
at pci0 dev 9 function 2 not configured ohci0 at pci0 dev 10 function 0
"NVIDIA MCP55 USB" rev 0xa1: apic 2 int 7 (irq 7), version 1.0, legacy
support ehci0 at pci0 dev 10 function 1 "NVIDIA MCP55 USB" rev 0xa2: apic
2 int 10 (irq 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0: NVIDIA
EHCI root hub, rev 2.00/1.00, addr 1 pciide0 at pci0 dev 12 function 0
"NVIDIA MCP55 IDE" rev 0xa1: DMA, channel 0 configured to compatibility,
channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0
drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0:
SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA
mode 4 pciide0: channel 1 ignored (disabled) pciide1 at pci0 dev 13
function 0 "NVIDIA MCP55 SATA" rev 0xa2: DMA pciide1: using apic 2 int 5
(irq 5) for native-PCI interrupt pciide2 at pci0 dev 13 function 1
"NVIDIA MCP55 SATA" rev 0xa2: DMA pciide2: using apic 2 int 5 (irq 5) for
native-PCI interrupt pciide3 at pci0 dev 13 function 2 "NVIDIA MCP55
SATA" rev 0xa2: DMA pciide3: using apic 2 int 5 (irq 5) for native-PCI
interrupt ppb4 at pci0 dev 14 function 0 "NVIDIA MCP55 PCI-PCI" rev 0xa2
pci5 at ppb4 bus 5 wi0 at pci5 dev 7 function 0 "Intersil PRISM2.5" rev
0x01: apic 2 int 10 (irq 10) wi0: PRISM2.5 ISL3874A(Mini-PCI) (0x8013),
Firmware 1.0.7 (primary), 1.3.6 (station), address 00:09:5b:2f:6b:8d "TI
TSB43AB22 FireWire" rev 0x00 at pci5 dev 11 function 0 not configured
azalia0 at pci0 dev 14 function 1 "NVIDIA MCP55 HD Audio" rev 0xa2: apic
2 int 11 (irq 11) azalia0: host: High Definition Audio rev. 1.0 azalia0:
codec: Analog Devices/0x198b (rev. 2.0), HDA version 1.0 audio0 at
azalia0 nfe0 at pci0 dev 16 function 0 "NVIDIA MCP55 LAN" rev 0xa2: apic
2 int 5 (irq 5), address 00:18:f3:49:aa:86 eephy0 at nfe0 phy 1: Marvell
88E1116 Gigabit PHY, rev. 1 nfe1 at pci0 dev 17 function 0 "NVIDIA MCP55
LAN" rev 0xa2: apic 2 int 10 (irq 10), address 00:18:f3:49:ad:96 eephy1
at nfe1 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1 ppb5 at pci0 dev 18
function 0 "NVIDIA MCP55 PCIE" rev 0xa2 pci6 at ppb5 bus 6 ppb6 at pci0
dev 20 function 0 "NVIDIA MCP55 PCIE" rev 0xa2 pci7 at ppb6 bus 7 ppb7 at
pci0 dev 22 function 0 "NVIDIA MCP55 PCIE" rev 0xa2 pci8 at ppb7 bus 8
sili0 at pci8 dev 0 function 0 "CMD Technology SiI3132 SATA" rev 0x01:
apic 2 int 11 (irq 11) scsibus2 at sili0: 2 targets ppb8 at pci0 dev 23
function 0 "NVIDIA MCP55 PCIE" rev 0xa2 pci9 at ppb8 bus 9 vga1 at pci9
dev 0 function 0 "NVIDIA GeForce 7600 GT" rev 0xa1 wsdisplay0 at vga1 mux
1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25,
vt100 emulation) pchb0 at pci0 dev 24 function 0 "AMD AMD64
HyperTransport" rev 0x00 pchb1 at pci0 dev 24 function 1 "AMD AMD64
Address Map" rev 0x00 pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM
Cfg" rev 0x00 pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev
0x00 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4:
ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd
slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console
keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0:
spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 intr_establish: pic
ioapic0 pin 7: can't share type 3 with 2 it0 at isa0 port 0x290/8: IT87
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 ugen0 at uhub0
port 9 ugen0: Realtek RTL8187, rev 2.00/1.00, addr 2 uts0 at uhub1 port 7
configuration 1 interface 0 uts0: eGalax Touch Panel, rev 1.10/1.00, addr
2 wsmouse0 at uts0 mux 0 ugen1 at uhub1 port 8 ugen1: MConsult IRTrans
USB, rev 1.10/4.00, addr 3 dkcsum: sd0 matches BIOS drive 0x80 root on
sd0a swap on sd0b dump on sd0b
_________________________________________________________________
versendet mit www.Oleco.de Mail - Anmeldung und Nutzung kostenlos! Oleco
www.netlcr.de jetzt auch mit SPAMSCHUTZ.
