hi, i can show my ppp.conf, because i have the same errors. this config was working since years, i tried to comment lqr lines today... but changed nothing in behavior.
default: set log Phase Chat IPCP CCP tun command set redial 15 0 set reconnect 15 10000 pppoe: set device "!/usr/sbin/pppoe -i nfe1" set server /var/run/pppoe "" 0177 disable acfcomp protocomp deny acfcomp set mtu max 1454 set mru max 1454 set crtscts off set speed sync enable lqr set lqrperiod 5 set cd 5 set dial set login set timeout 0 set authname ****** set authkey ****** add! default HISADDR enable dns resolv readonly enable mssfixup On Fre Aug 10 16:54 , Gregory Edigarov sent: Oops, I am sorry, I cannot show you my ppp.conf. It's at home, and the pc is now turned off. James Lepthien wrote: > Hi, > > Am 10.08.2007 um 09:40 schrieb Gregory Edigarov: >> Yes, with most recent sources from cvs my userland ppp is >> connecting... But hangs shortly. >> First I thought it is the problem in the nfe driver, but after >> switching to rl it hangs too. So, it definitely not a problem with >> underlaying device. If I ping the other site (no matter which), I >> could see that it hangs after some 25 - 30 (depending on the >> situation) pings. > > I did not see your ppp.conf but I had a similar problem and my > connection dropped every now and then. I had to disable the lqr > setting in my ppp.conf. Since then I never had any problems with my > connection. > > Cheers, > James > > -- With best regards, Gregory Edigarov _________________________________________________________________ versendet mit www.Oleco.de Mail - Anmeldung und Nutzung kostenlos! Oleco www.netlcr.de jetzt auch mit SPAMSCHUTZ.
