Hi,
Please look at my dmesg if that is useful.
And please let me know if I should provide any other info.
Thankyou so much
Kind Regards
Siju
DMESG
=====================================================================
# cat /var/run/dmesg.boot
OpenBSD 4.0 (GENERIC) #690: Sat Sep 16 20:26:25 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1039593472 (1015228K)
avail mem = 878694400 (858100K)
using 22937 buffers containing 104165376 bytes (101724K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfc650 (54 entries)
bios0: Acer Aspire Series
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3400+, 2193.94 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 17 function 0 "ATI IXP400 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <ST3120827AS>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
pciide0: port 1: device present, speed: 1.5Gb/s
wd1 at pciide0 channel 1 drive 0: <ST3120827AS>
wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6
pciide1 at pci0 dev 18 function 0 "ATI IXP400 SATA" rev 0x80: DMA
pciide1: using irq 5 for native-PCI interrupt
ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x80: irq 4,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 19 function 1 "ATI IXP400 USB" rev 0x80: irq 4,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 19 function 2 "ATI IXP400 USB2" rev 0x80: irq 4
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
piixpm0 at pci0 dev 20 function 0 "ATI IXP400 SMBus" rev 0x81: SMI
iic0 at piixpm0
"unknown" at iic0 addr 0x2f not configured
pciide2 at pci0 dev 20 function 1 "ATI IXP400 IDE" rev 0x80: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
azalia0 at pci0 dev 20 function 2 "ATI IXP450 HD Audio" rev 0x01: irq 5
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Realtek ALC880 (rev. 8.0), HDA version 1.0
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI IXP400 ISA" rev 0x80
ppb1 at pci0 dev 20 function 4 "ATI IXP400 PCI" rev 0x80
pci2 at ppb1 bus 2
re0 at pci2 dev 3 function 0 "Realtek 8169" rev 0x10: irq 5, address
00:16:17:20:2a:a6
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
syncing disks...
OpenBSD 4.0 (GENERIC.RAID) #0: Wed Nov 15 08:04:56 IST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.RAID
real mem = 1039593472 (1015228K)
avail mem = 878211072 (857628K)
using 22937 buffers containing 104165376 bytes (101724K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfc650 (54 entries)
bios0: Acer Aspire Series
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3400+, 2193.92 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 17 function 0 "ATI IXP400 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <ST3120827AS>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
pciide0: port 1: device present, speed: 1.5Gb/s
wd1 at pciide0 channel 1 drive 0: <ST3120827AS>
wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6
pciide1 at pci0 dev 18 function 0 "ATI IXP400 SATA" rev 0x80: DMA
pciide1: using irq 5 for native-PCI interrupt
ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x80: irq 4,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 19 function 1 "ATI IXP400 USB" rev 0x80: irq 4,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 19 function 2 "ATI IXP400 USB2" rev 0x80: irq 4
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
piixpm0 at pci0 dev 20 function 0 "ATI IXP400 SMBus" rev 0x81: SMI
iic0 at piixpm0
"unknown" at iic0 addr 0x2f not configured
pciide2 at pci0 dev 20 function 1 "ATI IXP400 IDE" rev 0x80: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
azalia0 at pci0 dev 20 function 2 "ATI IXP450 HD Audio" rev 0x01: irq 5
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Realtek ALC880 (rev. 8.0), HDA version 1.0
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI IXP400 ISA" rev 0x80
ppb1 at pci0 dev 20 function 4 "ATI IXP400 PCI" rev 0x80
pci2 at ppb1 bus 2
re0 at pci2 dev 3 function 0 "Realtek 8169" rev 0x10: irq 5, address
00:16:17:20:2a:a6
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
Kernelized RAIDframe activated
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
#
======================================================================
On 11/15/06, Siju George <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I have been trying to configure software RAID using resources at
>
> http://www.openbsd.org/faq/faq14.html#RAID
>
> and
>
> http://www.openbsd.org/faq/faq14.html#RAID
>
> I did get the error
>
> # raidctl -C /root/raid0.conf raid0
> raidctl: ioctl (RAIDFRAME_CONFIGURE) failed
>
> The raid configuration file entries are
>
> =======================================================
> # cat /root/raid0.conf
> START array
> # numRow numCol numSpare
> 1 2 0
>
> START disks
> /dev/wd2b # the fake device
> /dev/wd1b
>
> START layout
> 128 1 1 1
>
> START queue
> fifo 100
> ================================================
>
> Could some one help me trouble shoot this please?
> I did recompile the kernel with the following options and am booting that
kernel
> =================================================
> # cat /usr/src/sys/arch/amd64/conf/GENERIC.RAID
> include "arch/amd64/conf/GENERIC" # include GENERIC configuration
> option RAID_AUTOCONFIG # automatically configure RAIDframe arrays on boot
> pseudo-device raid 4 # RAIDframe disk driver
> # uname -a
> OpenBSD xxx.yyy.local 4.0 GENERIC.RAID#0 amd64
> #
> ==========================================================
>
> # disklabel -E wd1
> # Inside MBR partition 3: type A6 start 63 size 234436482
>
> Treating sectors 63-234436545 as the OpenBSD portion of the disk.
> You can use the 'b' command to change this.
>
> Initial label editor (enter '?' for help at any prompt)
> > p m
> device: /dev/rwd1c
> type: ESDI
> disk: ESDI/IDE disk
> label: ST3120827AS
> bytes/sector: 512
> sectors/track: 63
> tracks/cylinder: 16
> sectors/cylinder: 1008
> cylinders: 16383
> total bytes: 114473.5M
> free bytes: 114470.9M
> rpm: 3600
>
> 16 partitions:
> # size offset fstype [fsize bsize cpg]
> c: 114473.5M 0.0M unused 0 0 # Cyl 0 -232580
> > a a
> offset: [63]
> size: [234436482] 1024m
> Rounding to nearest cylinder: 2097585
> FS type: [4.2BSD]
> > a b
> offset: [2097648]
> size: [232338897] RAID
> Invalid entry
> size: [232338897]
> FS type: [swap] RAID
> > p m
> device: /dev/rwd1c
> type: ESDI
> disk: ESDI/IDE disk
> label: ST3120827AS
> bytes/sector: 512
> sectors/track: 63
> tracks/cylinder: 16
> sectors/cylinder: 1008
> cylinders: 16383
> total bytes: 114473.5M
> free bytes: 0.0M
> rpm: 3600
>
> 16 partitions:
> # size offset fstype [fsize bsize cpg]
> a: 1024.2M 0.0M 4.2BSD 2048 16384 16 # Cyl 0*- 2080
> b: 113446.7M 1024.2M RAID # Cyl 2081
-232575*
> c: 114473.5M 0.0M unused 0 0 # Cyl 0 -232580
> > q
> Write new label?: [y]
> # newfs wd1a
> Warning: 64 sector(s) in last cylinder unallocated
> /dev/rwd1a: 2097584 sectors in 2081 cylinders of 16 tracks, 63 sectors
> 1024.2MB in 7 cyl groups (328 c/g, 161.44MB/g, 20608 i/g)
> super-block backups (for fsck -b #) at:
> 32, 330720, 661408, 992096, 1322784, 1653472, 1984160,
> # mount /dev/wd1a /mnt
> # cp /bsd /usr/mdec/boot /mnt
> # /usr/mdec/installboot -v /mnt/boot /usr/mdec/biosboot wd1
> boot: /mnt/boot
> proto: /usr/mdec/biosboot
> device: /dev/rwd1c
> /usr/mdec/biosboot: entry point 0
> proto bootblock size 512
> /mnt/boot is 3 blocks x 16384 bytes
> fs block shift 2; part offset 63; inode block 24, offset 936
> using MBR partition 3: type 166 (0xa6) offset 63 (0x3f)
> # cat >> /root/raid0.conf << EOF
> > START array
> > # numRow numCol numSpare
> > 1 2 0
> >
> > START disks
> > /dev/wd2b # the fake device
> > /dev/wd1b
> >
> > START layout
> > 128 1 1 1
> >
> > START queue
> > fifo 100
> > EOF
> # raidctl -C /root/raid0.conf raid0
> raidctl: ioctl (RAIDFRAME_CONFIGURE) failed
