On Tue, Nov 21, 2006 at 08:22:20PM -0600, Vijay Sankar wrote:
> Good day,
> 
> I took one of my desktops that has two EIDE hard drives and went through
> the steps I had sent earlier to you and tried to verify that it does
> work on OpenBSD 4.0. It does work -- almost. I am pretty sure I was
> booting from /dev/raid0a on the old server but couldn't repeat that with
> this desktop. Here is my df -h 
> 
> ftl21# df -h
> Filesystem     Size    Used   Avail Capacity  Mounted on
> /dev/wd0a      3.9G    1.6G    2.2G    42%    /
> /dev/raid0d    7.9G    6.0K    7.5G     0%    /tmp
> /dev/raid0e    7.9G    4.0M    7.5G     0%    /var
> /dev/raid0f    7.9G    1.5G    6.0G    20%    /usr
> /dev/raid0g    7.9G    3.0M    7.5G     0%    /var/www
> /dev/raid0h   66.7G    2.0K   63.4G     0%    /home
> 
> Please note that I am using /dev/wd0a for root and not /dev/raid0a as I
> wanted to do.
> 
> Here is a copy of my fstab on wd0a in case that helps
> 
> /dev/wd0a / ffs rw 1 1
> /dev/raid0b none swap sw 0 0
> /dev/raid0d /tmp ffs rw,nodev,nosuid,softdep 1 2
> /dev/raid0e /var ffs rw,nodev,nosuid,softdep 1 2
> /dev/raid0f /usr ffs rw,nodev,softdep 1 2
> /dev/raid0g /var/www ffs rw,nodev,nosuid,softdep 1 2
> /dev/raid0h /home ffs rw,nodev,nosuid,softdep 1 2
> 
> I have the same fstab file on wd1a, wd0a, and raid0a.
> 
> I had /dev/raid0a / ffs rw 1 1 on the old server's fstab - according to
> my notes. However, when I do that with this installation, I get a bunch
> of errors, so thought having /dev/wd0a instead of /dev/raid0a should at
> least provide software RAID for /var, /home, /var/www, /usr, etc. If you
> figure out how to boot from /root0a please do let me know. If not, I
> will try to redo this whole thing over the christmas holidays and see if
> I can make it work.

raidctl -A root raid0?

                Joachim

Reply via email to