On Wed, 15 Nov 2006, Siju George wrote:
> Hi,
>
> Please look at my dmesg if that is useful.
> And please let me know if I should provide any other info.
>
> Thankyou so much
>
> Kind Regards
>
> Siju
>
> DMESG
> =====================================================================
> # cat /var/run/dmesg.boot
> OpenBSD 4.0 (GENERIC) #690: Sat Sep 16 20:26:25 MDT 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
The clue is here. You are not running a kernel with raidframe enabled.
I'd advise to first play with this using a regular root file system,
and put some data on a raidframe file system, and only move to a
raidframe root after that. Having a raidframe root can be quite
confusing, since the boot device does not match the root device.
-Otto
> real mem = 1039593472 (1015228K)
> avail mem = 878694400 (858100K)
> using 22937 buffers containing 104165376 bytes (101724K) of memory
> mainbus0 (root)
> bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfc650 (54 entries)
> bios0: Acer Aspire Series
> cpu0 at mainbus0: (uniprocessor)
> cpu0: AMD Athlon(tm) 64 Processor 3400+, 2193.94 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> 64b/line 16-way L2 cache
> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
> pci0 at mainbus0 bus 0: configuration mode 1
> pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
> ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pciide0 at pci0 dev 17 function 0 "ATI IXP400 SATA" rev 0x80: DMA
> pciide0: using irq 11 for native-PCI interrupt
> pciide0: port 0: device present, speed: 1.5Gb/s
> wd0 at pciide0 channel 0 drive 0: <ST3120827AS>
> wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
> wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
> pciide0: port 1: device present, speed: 1.5Gb/s
> wd1 at pciide0 channel 1 drive 0: <ST3120827AS>
> wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
> wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6
> pciide1 at pci0 dev 18 function 0 "ATI IXP400 SATA" rev 0x80: DMA
> pciide1: using irq 5 for native-PCI interrupt
> ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x80: irq 4,
> version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 4 ports with 4 removable, self powered
> ohci1 at pci0 dev 19 function 1 "ATI IXP400 USB" rev 0x80: irq 4,
> version 1.0, legacy support
> usb1 at ohci1: USB revision 1.0
> uhub1 at usb1
> uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 4 ports with 4 removable, self powered
> ehci0 at pci0 dev 19 function 2 "ATI IXP400 USB2" rev 0x80: irq 4
> usb2 at ehci0: USB revision 2.0
> uhub2 at usb2
> uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1
> uhub2: 8 ports with 8 removable, self powered
> piixpm0 at pci0 dev 20 function 0 "ATI IXP400 SMBus" rev 0x81: SMI
> iic0 at piixpm0
> "unknown" at iic0 addr 0x2f not configured
> pciide2 at pci0 dev 20 function 1 "ATI IXP400 IDE" rev 0x80: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> azalia0 at pci0 dev 20 function 2 "ATI IXP450 HD Audio" rev 0x01: irq 5
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: Realtek ALC880 (rev. 8.0), HDA version 1.0
> audio0 at azalia0
> pcib0 at pci0 dev 20 function 3 "ATI IXP400 ISA" rev 0x80
> ppb1 at pci0 dev 20 function 4 "ATI IXP400 PCI" rev 0x80
> pci2 at ppb1 bus 2
> re0 at pci2 dev 3 function 0 "Realtek 8169" rev 0x10: irq 5, address
> 00:16:17:20:2a:a6
> rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
> pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
> pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
> pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
> pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
> isa0 at pcib0
> isadma0 at isa0
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> dkcsum: wd0 matches BIOS drive 0x80
> dkcsum: wd1 matches BIOS drive 0x81
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> syncing disks...
> OpenBSD 4.0 (GENERIC.RAID) #0: Wed Nov 15 08:04:56 IST 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.RAID
> real mem = 1039593472 (1015228K)
> avail mem = 878211072 (857628K)
> using 22937 buffers containing 104165376 bytes (101724K) of memory
> mainbus0 (root)
> bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfc650 (54 entries)
> bios0: Acer Aspire Series
> cpu0 at mainbus0: (uniprocessor)
> cpu0: AMD Athlon(tm) 64 Processor 3400+, 2193.92 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> 64b/line 16-way L2 cache
> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
> pci0 at mainbus0 bus 0: configuration mode 1
> pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
> ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pciide0 at pci0 dev 17 function 0 "ATI IXP400 SATA" rev 0x80: DMA
> pciide0: using irq 11 for native-PCI interrupt
> pciide0: port 0: device present, speed: 1.5Gb/s
> wd0 at pciide0 channel 0 drive 0: <ST3120827AS>
> wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
> wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
> pciide0: port 1: device present, speed: 1.5Gb/s
> wd1 at pciide0 channel 1 drive 0: <ST3120827AS>
> wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
> wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6
> pciide1 at pci0 dev 18 function 0 "ATI IXP400 SATA" rev 0x80: DMA
> pciide1: using irq 5 for native-PCI interrupt
> ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x80: irq 4,
> version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 4 ports with 4 removable, self powered
> ohci1 at pci0 dev 19 function 1 "ATI IXP400 USB" rev 0x80: irq 4,
> version 1.0, legacy support
> usb1 at ohci1: USB revision 1.0
> uhub1 at usb1uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 4 ports with 4 removable, self powered
> ehci0 at pci0 dev 19 function 2 "ATI IXP400 USB2" rev 0x80: irq 4
> usb2 at ehci0: USB revision 2.0
> uhub2 at usb2
> uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1
> uhub2: 8 ports with 8 removable, self powered
> piixpm0 at pci0 dev 20 function 0 "ATI IXP400 SMBus" rev 0x81: SMI
> iic0 at piixpm0
> "unknown" at iic0 addr 0x2f not configured
> pciide2 at pci0 dev 20 function 1 "ATI IXP400 IDE" rev 0x80: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> azalia0 at pci0 dev 20 function 2 "ATI IXP450 HD Audio" rev 0x01: irq 5
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: Realtek ALC880 (rev. 8.0), HDA version 1.0
> audio0 at azalia0
> pcib0 at pci0 dev 20 function 3 "ATI IXP400 ISA" rev 0x80
> ppb1 at pci0 dev 20 function 4 "ATI IXP400 PCI" rev 0x80
> pci2 at ppb1 bus 2
> re0 at pci2 dev 3 function 0 "Realtek 8169" rev 0x10: irq 5, address
> 00:16:17:20:2a:a6
> rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
> pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
> pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
> pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
> pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
> isa0 at pcib0
> isadma0 at isa0
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> Kernelized RAIDframe activated
> dkcsum: wd0 matches BIOS drive 0x80
> dkcsum: wd1 matches BIOS drive 0x81
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> #
> ======================================================================
>
>
> On 11/15/06, Siju George <[EMAIL PROTECTED]> wrote:
> > Hi,
> >
> > I have been trying to configure software RAID using resources at
> >
> > http://www.openbsd.org/faq/faq14.html#RAID
> >
> > and
> >
> > http://www.openbsd.org/faq/faq14.html#RAID
> >
> > I did get the error
> >
> > # raidctl -C /root/raid0.conf raid0
> > raidctl: ioctl (RAIDFRAME_CONFIGURE) failed
> >
> > The raid configuration file entries are
> >
> > =======================================================
> > # cat /root/raid0.conf
> > START array
> > # numRow numCol numSpare
> > 1 2 0
> >
> > START disks
> > /dev/wd2b # the fake device
> > /dev/wd1b
> >
> > START layout
> > 128 1 1 1
> >
> > START queue
> > fifo 100
> > ================================================
> >
> > Could some one help me trouble shoot this please?
> > I did recompile the kernel with the following options and am booting that
> > kernel
> > =================================================
> > # cat /usr/src/sys/arch/amd64/conf/GENERIC.RAID
> > include "arch/amd64/conf/GENERIC" # include GENERIC configuration
> > option RAID_AUTOCONFIG # automatically configure RAIDframe arrays on boot
> > pseudo-device raid 4 # RAIDframe disk driver
> > # uname -a
> > OpenBSD xxx.yyy.local 4.0 GENERIC.RAID#0 amd64
> > #
> > ==========================================================
> >
> > # disklabel -E wd1
> > # Inside MBR partition 3: type A6 start 63 size 234436482
> >
> > Treating sectors 63-234436545 as the OpenBSD portion of the disk.
> > You can use the 'b' command to change this.
> >
> > Initial label editor (enter '?' for help at any prompt)
> > > p m
> > device: /dev/rwd1c
> > type: ESDI
> > disk: ESDI/IDE disk
> > label: ST3120827AS
> > bytes/sector: 512
> > sectors/track: 63
> > tracks/cylinder: 16
> > sectors/cylinder: 1008
> > cylinders: 16383
> > total bytes: 114473.5M
> > free bytes: 114470.9M
> > rpm: 3600
> >
> > 16 partitions:
> > # size offset fstype [fsize bsize cpg]
> > c: 114473.5M 0.0M unused 0 0 # Cyl 0
> > -232580
> > > a a
> > offset: [63]
> > size: [234436482] 1024m
> > Rounding to nearest cylinder: 2097585
> > FS type: [4.2BSD]
> > > a b
> > offset: [2097648]
> > size: [232338897] RAID
> > Invalid entry
> > size: [232338897]
> > FS type: [swap] RAID
> > > p m
> > device: /dev/rwd1c
> > type: ESDI
> > disk: ESDI/IDE disk
> > label: ST3120827AS
> > bytes/sector: 512
> > sectors/track: 63
> > tracks/cylinder: 16
> > sectors/cylinder: 1008
> > cylinders: 16383
> > total bytes: 114473.5M
> > free bytes: 0.0M
> > rpm: 3600
> >
> > 16 partitions:
> > # size offset fstype [fsize bsize cpg]
> > a: 1024.2M 0.0M 4.2BSD 2048 16384 16 # Cyl 0*-
> > 2080
> > b: 113446.7M 1024.2M RAID # Cyl 2081
> > -232575*
> > c: 114473.5M 0.0M unused 0 0 # Cyl 0
> > -232580
> > > q
> > Write new label?: [y]
> > # newfs wd1a
> > Warning: 64 sector(s) in last cylinder unallocated
> > /dev/rwd1a: 2097584 sectors in 2081 cylinders of 16 tracks, 63 sectors
> > 1024.2MB in 7 cyl groups (328 c/g, 161.44MB/g, 20608 i/g)
> > super-block backups (for fsck -b #) at:
> > 32, 330720, 661408, 992096, 1322784, 1653472, 1984160,
> > # mount /dev/wd1a /mnt
> > # cp /bsd /usr/mdec/boot /mnt
> > # /usr/mdec/installboot -v /mnt/boot /usr/mdec/biosboot wd1
> > boot: /mnt/boot
> > proto: /usr/mdec/biosboot
> > device: /dev/rwd1c
> > /usr/mdec/biosboot: entry point 0
> > proto bootblock size 512
> > /mnt/boot is 3 blocks x 16384 bytes
> > fs block shift 2; part offset 63; inode block 24, offset 936
> > using MBR partition 3: type 166 (0xa6) offset 63 (0x3f)
> > # cat >> /root/raid0.conf << EOF
> > > START array
> > > # numRow numCol numSpare
> > > 1 2 0
> > >
> > > START disks
> > > /dev/wd2b # the fake device
> > > /dev/wd1b
> > >
> > > START layout
> > > 128 1 1 1
> > >
> > > START queue
> > > fifo 100
> > > EOF
> > # raidctl -C /root/raid0.conf raid0
> > raidctl: ioctl (RAIDFRAME_CONFIGURE) failed
